Tag Archive | bmw icom a2

Buy BMW Programming ICOM A2+B+C,Get BMW ICOM D cable for free

Nov3

ICOM A2+B+C Diagnostic & Programming Tool with Wifi

PROMOTION!
From 25th.OCT to 30th.NOV,buy SP168,send one SF115-B free!!!!

Buy it for 5 reasons:

1. Software Version: 2016.03
ISTA-D:3.53.30
ISTA-P: 3.57.4.003
VIN: 2016.01.11

Firmware Version: ICOM Application-01.40.05 ICOM Boot-01.23.01

2. Support WIFI,wireless connection.Supports for a new Intel adapter function.

3. Supports almost 95% laptop on the world with Intel chip( I3/I5/I7 series) and have 4GB memory.

4. Multi-Language:English, German, Russian,Korean.

5. Support bmw diagnose and programming, also TIS diagram circuit.

Notice:

No Network And Also No Connection With The Original Server When You Use The BMW ICOM Software HDD.
Otherwise It Is Will Be Damaged,And Need You Send Back For Repair

ICOM A2 Firmware Update Steps and Note

Jun2

new-bmw-icom-a2-b-c-diagnostic-and-programming-tool-without-software-blog-1

9 Steps to update ICOM A2 :
1. Use Network cable to connect ICOM (ICOM A1 or Common version ICOM A2) with a computer, charge ICOM (ICOM A1 or Common version ICOM A2) with 12V power adapter or connect ICOM with the BMW vehicle.
2. Open IE Internet Exploer, browse http://169.254.92.38:60080/, log in with username/password: root/NZY11502.
3. Click “Update Firmware”, you will see ICOM firmware version information.
4. Choose file “ICOM-BootImage-01-13-00.bin”, set image type to SYSTEM, click “Send the file”.
5. When it pops up “Write the image file to the flash?”, click “Yes”, then ICOM indicator light will turn red.
6. When it pops up “The SYSTEM IMAGE update was successfull”, click “Update Firmware”.
7. Choose “ICOM-ApplicationImage-01-18-00.bin”, set image type to APPLICATION, click “Send the file”, it will take several minutes since the file is a little bit large.
8. When it pops up “Write the image file to the flash?”, click “Yes”, then the ICOM indicator light will turn red for the second times.
9. When it finish upgrading, click “reboot” to reboot the computer.

 

Important Note For ICOM A2:

1. Setting up your computer to obtain an IP address automatically;
2. Firstly choose the smaller file “ICOM-BootImage-01-13-00.bin” , then set image type to SYSTEM;
Secondly choose the bigger file “ICOM-ApplicationImage-01-18-00.bin”, then set image type to APPLICATION.

 

How to connect BMW ICOM A2 to WinKFP

Apr26

Here are two methods usually adopted by BMW owners with BMW ICOM A2 WinKFP.

error-211-solution-blog-1

First method

to lock the ICOM to Connection Mode: STATIC_IP and then use iTool Radar by Nubix to locate it on the LAN.

Second method

but that you will need the password of ICOM, but as no one brings out the password, you can forget this possibility.

only possibility is more like you’ve already described the ICOM itools with radar and lock.
in the Ediabas.ini you have to change something
Interface: REMOTE
and host the ip the ICOM have.
ICOM you can put on STATIC_IP with a file called
USER.settings(open it with editor)

ConnectionMode = STATIC_IP
Ip = 192.168.68.40
Netmask = 255.255.255.0
Gateway = 192.168.68.1

and a file which is called user.settings.log must remain empty.
The ICOM describes this file automatically.

these two files on a USB stick(USB2.0) into the BMW ICOM usb port
light of ICOM will turn on.
ICOM must properly afterwards user.settings.log have described themselves.