Tag Archive | bmw inpa k can

(Solved) K+DCAN INPA Interface INITIALIZATION ERROR

My k+dcan interface shows error: INITIALIZATION ERROR. killed several hours with this knock-off and i’m about to destroy my laptop because of frustration.

Car: BMW 2011 – e92 – LCI.

i have set the COM to 1, obd.ini is alos COM1. i don’t get it.

ediabas-bmw-inpa-k-can-blog-1
SOLVED:
(solution offered by an experienced user with K+Dcan cable)

i had to modify the EDIBAS.INI

as follows

RemoteHost
; Description : server address/name
; Default = –
; RemoteHost = Desmo16

Desmo16 being my computer’s name (note that this must be maximum 8 chars)

and

Port
; Description : IP communication port
; Value : 1000 < port < 30000
;
; Spezialfall OP(P)S /ICOM:
; Value : 6801 ;OBD-Treiber (CAN)
; Value : 6802 ;Most-Treiber
;
; Default = –
; Port = 6801

OBD2 notice that you should be sure port is 6801 as mine was 3000.

i also ran the DCAN utility found here: http://osefactory.com/tools/k+dcan/

and set it on 500 kbit DCAN

it worked like a charm after i made these mods.