VVDI MB BGA Tool V2.0.6 Key Programmer

Feb2

VVDI MB Tool is powerful Mercedes Benz Key Programmer, can calculate Benz BGA key password and add new BGA Keys, support all Benz keys after year 2011. Newest Update VVDI Benz can read EIS under OBD mode will check car power automatically. Avoid lost data in EIS

VVDI MB BGA Tool highlights:

1. Newest version: V2.0.6
2. Update online
3. VVDI Benz can calculate Benz BGA key password and add new Mercedes BGA Keys

4. VVDI MB Tool support all Benz keys after year 2011
Customer feedback on VVDI Benz BGA tool:

1. i test password from 212 new model super
good tool need pay 2 tokens
need 10 min all ok
2. Do you have see video of this tool?
They say can do all key lost on w212.
No tool can do it even Mehaco or nec pro51.
w212 eis on video, sure it can.. mehaco/mercedesinstrument can do all keys lost on w212.. the option is availible a few months..
Tips on VVDI Benz:
1. If you have IKEYCUTTER CONDOR XC-007 or iKeycutter CONDOR XC-MINI Key Cutting Machine, please buy SK185-B
We can calculate password once for free everyday, if you need more in the same day, you need pay 35.00USD/Once

2. One cutting machine can only bind with one SK185-B,if you want to buy several SK185-B,you should also buy corresponding cutting machine,or you should buy SK185

3. If you do not have IKEYCUTTER CONDOR XC-007 or iKeycutter CONDOR XC-MINI Key Cutting Machine, please buy SK185
The password calculate cost is 35.00USD/Once, collect need about 4 mintues, calcuate need about 2 mintues

Xhorse VVD MB BGA TOOL Function introduction
1.support BE key, read password and prepare new key via IR.
2.NEC V051, V057 support on board get password
3.All NEC keys support on board write and erase
4.password calculate:support BGA keys, NEC keys(include 51, 57version)etc.,work fast.
5.support renew EIS and ELV
6.support write EIS and ELV
7.support online generate key file
8.unlock ELV function will be released soon.
9.Renew other control modules function will support soon
Latest Technical details :
Note: VVDI MB BGA tool update goes well, the following workable models are for reference only.
Model support IR/OBD:
W164, W164 2009+
A166, W197,W212, W218, A246
A169, W209, W211
W172, W204, A207
W203
W204, W207, W212 only by dump
W209 only by dump
W210
W215, W220
W230
W216
W221
W906
Keys version supported:
v03, v06, v08
v05, v07, v09
v59,v61
Two adapters: one for versions 28, 35, 40, 51, 57, another one for version 59.
VVDI MB TOOL V2.0.6 Newly Update(2016-01-16)
*** Require firmware V2.0.6
===== BENZ V2.0.6 =====
1. Attention: All user update device to firmware v2.0.6, software v2.0.6, the lower version dont support password calculation
2. User manual v1.1 released, overview v1.2 released
3. Add support for disable key
4. Fix bug for test W164, W221 EIS status
5. Fix bug for write EIS data
6. Bugfix
This is from Auto Key Programmer technical support :http://www.carobd.de/wholesale/xhorse-vvdi-benz-tool-including-bga-calculation.html

SPX AUTOBOSS OTC D730 Automotive Diagnostic Scanner with Built In Printer

Jan27

SPX AUTOBOSS OTC D730 highlight:

Multi-language available: English, Italian, German, French, Spanish, Russian, Polish and Turkish. Note: the default language is English; you are optional to download the language you want.
2. Update: frequent Internet based software updates.
4. Access to powertrain, chassis and body systems, it is new and powerful scan tool for workshop and car owner’s.
5. Covers more than 50 vehicle makes from Europe, America, Australia and Asia.
6. One Year Warranty
Built in Printer
High resolution 7” VGA colour TFT touchscreen display
Stand allowing hanging on steering wheel
Operation System (OS):

Windows CE operating system

SPX AUTOBOSS OTC D730 Automotive Diagnostic Scanner more details:

Following Content include:

1) SPX AUTOBOSS OTC D730 packages

2) OTC D730 Included Accessories

3) OTC D730 Vehicle Cable Complete Set

4) OTC D730 Scanner function

5) OTC D730 Scanner works with what electronic control system

6) OTC D730 works with what car models

Details:

SPX AUTOBOSS OTC D730 packages:

Being an automotive diagnostic scanner for all makes, it has a big package with all kinds of adapters and cables, its package weights 12.3KG (27.12LB )

Package including:

ASSM D730 EMEA

SD Card 8GB

Label of Microsoft WinCE

Benz-38 Adaptor

Chrysler-16 Adaptor CCD

Toyota-22 Connestor

Mitsubishi 12+16 Connestor

Honda-3 Connestor

Audi-4 Connestor

Nissan-14 Connestor

Benz-4 Connestor

Citroen-16C Connestor

Benz-14 Connestor

OBDll-16 Connestor

BMW-20 Connestor

Marelli-3 Connestor

GM/DEAWOO-12 Connestor

KIA-20 Connestor

Mazda-17 Connestor

TOYOTA-17 Connestor

Mini-3 Connestor

CITROEN-2 Connestor

Fiat-16 Connestor

Cigarette lighter line

Battery Cable

Main Cable 2M

Fuse 5A 30X6

Fuse 5A 20X6

PRINTING PAPER

SD Card Reader

D730 User Manual

AC/DC Adaptor

European Power Supply Plug

OTC D730 Included Accessories:

Carrying case

100 – 240 volt power supply

SD card reader

Built-in printer kit
OTC D730 Vehicle Cable Complete Set:

OBD II adapters

European OBD I adapters

Australian OBDI adapters

Asian OBD I adapters

USA Domestic OBD I adapters

Chinese adapters

We can FREE added new cars for you (if you need leave message on order)

OTC D730 Scanner function:

Quick Test function to test most vehicle systems
Fault codes (DTC’s), Data Stream and Service Reset
Actuations, Adaptations- and Control Module Coding
CAN Bus with high/low speed
One OBD II/EOBD connector for all CAN Bus systems
6 .Demo Mode for many OEM’s

Data graphing
Self-check function
OTC D730 Scanner works with what electronic control system?

Chassis :

SBC – Sensortronic Brake Control

ESP – Electronic Stability Program

AIRmatic – AIRmatic ABC

TPC – Tyre Pressure Monitor

ABS – SRS

Body:

Seats and Doors

Actual Values

Actuations

Initial Startup

Control Unit Adaptations

Correction Programming

Air Conditioning:

AAC – Automatic Air Conditioning

REAR AC – Rear Air Conditioning

STH – Stationary Heater

HSW – Heated Steering Wheel

Informatio n and Communication:

ICM – Instrument Cluster

SCM – Steering Column Module

PTS – Parktronic System

Audio, Video, Navigation

Telematics

Drive:

Transmission

ESM – Electronic Selector Module

DTR – Distronic

Motor Electronics

Idle Re-learn

Diesel Injector Coding

Diesel Pump Initialisation

DPF Regeneration

OTC D730 works with what car models?

European Vehicles : Audi, BMW, Citroen, Fiat, Ford, Jaguar, Lancia, Land Rover,Mini, Mercedes-Benz, Opel, Peugeot, Porsche, Renault, Seat,Skoda, Smart, Volkswagen and Volvo

American Vehicles: Chrysler, Ford and General Motors

Chinese Vehicles: Chery, Foton, Geely and Great Wall

Asian Vehicles: Daewoo, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda,Mitsubishi, Nissan, SsangYong, Subaru, Suzuki and Toyota

AUSTRALIAN Vehicles: Ford and Holden

Clone 4D transponder with Zed-BULL and TPX Cloner Module

Jan19

Clone 4D transponder with Zed-BULL and TPX Cloner Module

1.Please connect TPX cloner Module to Zed-bull using cable and give power both to Zed-bull and TPX Cloner Module.

2.Please put original key to zedbull antenna, select “Copy” and press “Enter” and “R” Button.

3. Caution! Put the original key and press R! Don’t remove the key during the process!

4. Press “W” button and select TPX Cloner module.

5.Writing, connection and calculating, calculating may take up to 2 minutes.

6. Calculation Ok, please put TPX2 or EH2 to Zed-BULL antenna and press “W” button.

7. Verifying, and successful.

Bosch ESI Tronic Installation Step by Step

Jan19

Here we start:
1: Mount ESI Tronic Iso image “Recommend Magicdisc”.
2: Open the bosch ESI DVD and then run Setup.exe.
3: Few sec’s then this window will appear, select your language -> Continue.

4: New window will appear, Select user defined installation and leave I-key blanked -> Continue.

5: Chose your Installation Directory -> Continue.

6: New window will appear, just tick what u want (4ex: screen saver or Fuel injection pump section…).

7: U will get this window.

8: Drag and Drop the bases you want to install.

9: New window will appear, click Continue.

10: Installation will Start

11: Take a cup of coffee till the installation is finished.
OBD2 enginner Note: During the installation it will ask you to import DVD 2 so just mount Image 2 and then Continue.
Now this window will appear, Click Close.

12: New window will appear, U can click Yes “If u want to enter the license now” OR Click No ” If u want to install the license after installation is finished.
In this case, I’ll click NO.

13: Restart windows by clicking finish.

14: Now here you see how to activate ur ESI.

15: New window will appear, Customer code could be any number, to get ur Release code, copy ID no. to keygen, generate, then paste the Release code back to the window.

16: after you paste your Activation key , then click Ok.

17: Click close. Job is done en the bosch ESI DVD and then run Setup.exe.

Engine Control Module Recovery by GM MDI or Tech 2

Jan8

This is step-by-step instruction on how to do engine control module recovery on Cadillac cars.

modules tested successfully with the tools and guide below:
2009 Buick Enclave
2007-2009 Cadillac CTS, SRX, STS
2009 Chevrolet Traverse
2007 GMC Acadia
2009 GMC Acadia
2007 Saturn OUTLOOK
2009 Saturn OUTLOOK

Diagnostic tool:
GM MDI module/
GM GM Tech2 GM with 32MB Card and TIS2000

Engine control module recovery procedure:
1. Disconnect the programming device.
2. Power down the control modules connected to the GMLAN bus by disconnecting the positive battery cable for 2 minutes.
3. Reconnect the positive battery cable.
4. Determine which programming device will be used to perform the recovery steps.
If using MDI, connect to the programming station or Notebook using a cable (LAN). Proceed to Step 5 and then Steps 6-8.
If using a Tech 2 proceed to Steps 6-8.
5. Reboot the programming station or Notebook. This is to make sure nothing is in memory.
Kindly Note: Selecting Replace and Reprogram from the Select Diagnostic Tool and Process Screen is REQUIRED because some of the calibrations may be erased from the initial attempt to reprogram the module.
6. Reprogram the engine control module. Select Replace and Reprogram from the Select Diagnostic Tooland Process Screen.
7. Follow the on-screen instructions to complete the programming event.
8. Clear all DTCs using the GM Tech2 GM with 32MB Card and TIS2000 or GDS.

(Solved) K+DCAN INPA Interface INITIALIZATION ERROR

Jan8

My k+dcan interface shows error: INITIALIZATION ERROR. killed several hours with this knock-off and i’m about to destroy my laptop because of frustration.

Car: BMW 2011 – e92 – LCI.

i have set the COM to 1, obd.ini is alos COM1. i don’t get it.

SOLVED:
(solution offered by an experienced user with K+Dcan cable)

i had to modify the EDIBAS.INI

as follows

RemoteHost
; Description : server address/name
; Default = –
; RemoteHost = Desmo16

Desmo16 being my computer’s name (note that this must be maximum 8 chars)

and

Port
; Description : IP communication port
; Value : 1000 < port < 30000
;
; Spezialfall OP(P)S /ICOM:
; Value : 6801 ;OBD-Treiber (CAN)
; Value : 6802 ;Most-Treiber
;
; Default = –
; Port = 6801

OBD2 notice that you should be sure port is 6801 as mine was 3000.

i also ran the DCAN utility found here: http://osefactory.com/tools/k+dcan/

and set it on 500 kbit DCAN

it worked like a charm after i made these mods.

CarOBD.de

sales@CarOBD.de

Archives

VVDI MB BGA Tool V2.0.6 Key Programmer

SPX AUTOBOSS OTC D730 Automotive Diagnostic Scanner with Built In Printer

Clone 4D transponder with Zed-BULL and TPX Cloner Module

Clone 4D transponder with Zed-BULL and TPX Cloner Module

Bosch ESI Tronic Installation Step by Step

Engine Control Module Recovery by GM MDI or Tech 2

(Solved) K+DCAN INPA Interface INITIALIZATION ERROR