Tag Archive | autel maxiim im508

Operation Guide for Formatting IM508 Stuck on Startup Page !!

Operation Guide for Formatting Autel IM508 Stuck on Startup Page

One of our customer who own an Autel MaxiIM IM508 machine, when he use IM508 to do key programming for his vehicle, he got a problem. The machine stuck on the startup page and can not continue anymore.

im508 stuck on start page

But how to solve this problem when using machine ?

Here we share steps which provided by Autel factory engineer

I. Set up Computer Circumstances
1. Install RK driver
Open the folder “RK_DriverAssitant”, run Driverintall.exe, following the on-screen prompts to install the driver.

2. Install Google-USB driver
Some computers may need to install this driver.

Open the folder “Google-USB_driver”; If your computer OS is 32-bit, run DPInst32.exe and if your computer OS is 64-bit, run DPInst64.exe.

If you have already installed this driver before, please go directly to next step.

II. Reflash the Device
!!Attention:This procedure will format your device and will delete the data on your device.

3. Run Reflasing Tool
Open the folder “AndroidTool_Release_v2.1”, run AndroidTool.exe, the reflashing window will be displayed as shown in the figure below.

im508 format machine

4. Turn Your Device into Reflashing Mode
Connect your device to computer with USB cable and wait until the computer recognizes the device.

You can check the connection status via Device Manager on your computer.
As it is shown in the red mark on the figure below, the device was already recognized by the computer.

im508 format machine 1

5. Ready to Reflash.
Double click on the script named “reboot to loader.bat”;

im508 format machine 2

If it is run successfully, there will be a prompt message “Found One LOADER Device” displayed on the reboot window (as shown in the figure below).
After you saw this message, click “Run” button to start and wait till rooting process completed.

im508 format machine 3

Program 2020-2022 Hyundai i10 ID4A All Keys Lost By Autel IM508

Program 2020-2022 Hyundai i10 ID4A All Keys Lost By Autel IM508

Autel-IM508-Program-2020-2022-Hyundai-i10-ID4A-All-Keys-Lost-1-2-678x381

Autel MaxiIM IM508 Key Programmer (In 2022 we recommend Autel IM508 + XP400 Pro) is able to program 2020-2022 Hyundai i10 ID4A all keys lost by OBD with free pin code. Follow the steps below to learn how to do.

Connect Autel IM508 to OBD,
IMMO >> Hyundai >> Manual selection >> Europe >> I10(AC3) >> 2020- >> Smart key >> Yes >> Immo status scan >> Read PIN >> Read pin code(4A smart card)
This function only supports models with 4A chip type smart card. Please ensure the key type is correct!
Press the START button, turn the Hazard warning light on.
Password was read out: 439476.

Autel-IM508-Program-2020-2022-Hyundai-i10-ID4A-All-Keys-Lost-1-2

Autel-IM508-Program-2020-2022-Hyundai-i10-ID4A-All-Keys-Lost-2-2

Autel-IM508-Program-2020-2022-Hyundai-i10-ID4A-All-Keys-Lost-3-2

Autel-IM508-Program-2020-2022-Hyundai-i10-ID4A-All-Keys-Lost-4-2

All keys lost(guided) >> Start
This function supports add key and all key lost;
Performing this function will erase all existing keys, all the old keys must be relearned again to be able to use normally. Press “Yes” to continue.

Turn the ignition off
(note: the instrument screen is black)
Open and then close the driver door once!
Please enter the 6-digit security code: 439476
Click “OK” to complete the following steps:
Within 5s after “OK” is pressed. Use the back or top of the Universal Smart Key to hold down the START button for 5s until the anti-theft lamps flash.
(If the operation failed with the prompts, please remove the key case and re-execute the above steps so that the key chip can be successfully.)
Programming succeeded.
Number of current keys: 1
This is how to program 2022 Hyundai i10 ID4A all keys lost with Autel IM508.

Autel-IM508-Program-2020-2022-Hyundai-i10-ID4A-All-Keys-Lost-5-2

Autel-IM508-Program-2020-2022-Hyundai-i10-ID4A-All-Keys-Lost-6-2

Autel-IM508-Program-2020-2022-Hyundai-i10-ID4A-All-Keys-Lost-7-2