New Release:The Newest V2017.5 Professionale DPF+EGR REMOVER 3.0 Lambda Hotstart Flap,O2, DTC 2 Software Full

Jul27

ADS Automotive Diag Solutions Software Pack come with ADS DPF+EGR Remover V2017.5 and ADS Lambda V2017.3 module. ADS Professional DPF+EGR Remover support multi-languages, can work following hot ECU Programmers: Kess v2, Ktag K-tag master, Fgtech Galletto and MPPS.

DPF/EGR/LOMBDA 3 in 1 DPF/EGR V2017.5 Lambda V2017.3 Need Activation

These programs, they are very easy to use even for a beginner, just select the right car and ECU.

If you have selected your car’s ECU, the program will automatically turn the DPF or EGR solution off.

Top 7 Reasons to Buy Software DPF/EGR/LOMBDA 3 in 1:

1. You can use the current binary drives to start the ECUs: FGTECH Galletto, KESS V2, KTAG Master, MPPS, CMD, Byteshoter Master and all binary readers / writers, 100% files working with these 3 programs.

2. Professional DPF-EGR programs supported for 100% binaries.

3. Bosch, Siemens, Denso, Visteon, Delphi, Marelli, Transtron ECU are supported!

4. Supported by WinXP to Win8.1, Win10 (only 64 bit)

5. Multi-languages Supports: English, German, French, Spanish, Italian, Turkish, Slovak – Czech, Romanian, Portogues, Polish, Dutch

6. Note: We do not need to ship the parcel, software sent by email, send us code to activate DPF, EGR and Lambda license, it is included one free activation, then it will cost 20USD each time.

7. No need for Internet, no account, no limit, unlimited files!

Software includ:

DPF/EGR V2017.5

Lambda V2017.3

One licence to 3 softwares

This software works in 3 steps:

1. Select car model

2. Load the file to repair

3. Save the final FIXED file.

All operations are performed by software automatically. Users just need to read – write files with well known equipment to ECU.

More information, please browse:http://www.carobd.de/wholesale/dpf-egr-remover-software.html

Xhorse VVDI PROG Latest Software Version V4.6.0 Update and Free Downlode(2017-7-26)

Jul27

The software V4.6.0 downlode link password:123456

V4.6.0 (2017-07-26)

* This version DON’t need update firmware

* Fix some bugs

+ Add VVDI PROG USER MUNUAL 4.6.0 version in Doc folder

* Change some RENESAS-V850 chips DFLASH size to 64KB

* Fix GM-BCM3 option

* Fix V850E2 series diagrams

* Change KESSY(2008–) diagram

+ Add V850E-SK3H,V850-SJ3H series diagrams

+ Add NM93CS06, NM93CS46, NM93CS56, NM93CS66, FM93CS06, FM93CS46,FM93CS56,

FM93CS66 options in <1-EEPROM&FLASH>->

+ Add M93S06, M93S46, M93S56, M93S66, ST93CS46, ST93CS47, ST93CS56, ST93CS57,

ST93CS66, ST93CS67 options in <1-EEPROM&FLASH>->

+ Add D80(ADAPTER), D160(ADAPTER), M350803(ADAPTER), M350806(ADAPTER), M35080V6(ADAPTER),

M35080VP(ADAPTER) options in <1-EEPROM&FLASH>->(Need M35080/D80 ADAPTER)

+ Add MC9S12HN64_UNSECURED, MC9S12HZ64_UNSECURED, MC9S12HN64_SECURED,

MC9S12HZ64_SECURED options in <2-MCU>->

+ Add ST72321(R/AR)6, ST72F321(R/AR)6, ST72321(R/AR/J)7, ST72F321(R/AR/J)7, ST72321(R/AR/J)9,

ST72F321(R/AR/J)9, ST72521B(R/AR)6, ST72F521(R/AR)6, ST72521B(M/R/AR)9, ST72F521(M/R/AR)9 options

in <2-MCU>->

+ Add SPC5606S option in <2-MCU>->

+ Add ME7.5.20(ST10F275) option in <3-ECU>->

+ Add KESSY(2008–) option in <4-IMMOBILIZER>->

+ Add KEYLESS-ENTRY-MODULE(2009–)option in <4-IMMOBILIZER>->

+ Add HAVAL-H9-BCM(D70F3632) option in <4-IMMOBILIZER>->

+ Add BCM(2009–) option in <4-IMMOBILIZER>->

+ Add XINBAO(MC9S08LG16) option in <5-DASHBORAD>->

+ Add CRUZE(D70F3423) option in <5-DASHBORAD>->

+ Add DASHBORAD(2013–)(SPC5604S), DASHBORAD(2013–)(SPC5606S), FIESTA(3L16Y),

FOCUS-C-MAX(2009) options in <5-DASHBORAD>->

+ Add BESTURN-B70-SRS(D70F3623) option in <7-ARIBAG>->

+ Add ACCORD-SRS(SPC56AP54L3) option in <7-ARIBAG>->

+ Add SRS-VW20(SPC560P50L3) option in <7-ARIBAG>->

+ Add A4L-LEW-MODULE(2013) option in <8-OTHER>->

+ Add EVOQUE-EPB-MODULE(2013) option in <8-OTHER>->

More information, please browser :http://www.carobd.de/wholesale/vvdi-prog-programmer.html

New Arrivals:2017 Online Version Kess V2 V5.017 No Tokens Need Kess V2.23 Firmware V5.017 Add 140+ Protocols

Jul27

Online Version Kess V2 Firmware V5.017 support online service, can work with interent, no tokens need, newly add 140+ protocols. Kess V5.017 with encrypted USB dongle, program safer and more stable!

Kess V2 V5.017 Highlight:

1. Multi-language support: English, German, Spanish, Italian, Portuguese, French.

2. Newest software: Ksuite V2.23

KESS V2 V5.017 is with encrypted USB dongle, program safer and more stable!

KESS V5.017 software is very easy to install, just click, Next Step, then it will work fine!

3. Latest and Best Firmware V5.017:

KESS V2 V5.017 supports more 140 types of vehicles and protocols than KESS V2 V4.036

Kess V5.017 Compare with Kess V4.036 Car List

KESS V2 V5.017 supports all protocols such as EDC17/k-line/DSG/DQ200 DQ250 DQ500 Gearbox/ST10 ….,No gray protocols anymore!

Kess V2 V5.017 Newly Add ECU Protocol List

4. Online Version Kess V2 V5.017 is able to connect internet!!! Support online service!!!

5. 100% No Tokens Need for all vehicles, no tokens reset button, you can use Kess V5.017 for lifetime

6. Kess V2 Ksuite V2.23 Firmware V5.017 cover all major brands and protocols including Line, KAN, EDC17 and MED17 and for Ford J1850.

KESS V2 V5.017 can support cars/trucks/tractors/bikes! KESS V2 supports vehicles accroding to engine. So V5.017 KESS V2 can support new vehicles!

Kess V2 V5.017 Support Vehicle List

7. Works on Win XP / Win7 32bit, Win 8, etc.

8. Kess V2 V5.017 with a very affordable price, can read and write ECU via OBD2 port directly, no need to disassemble ECU from the car, easy to use.

2017 Online Version Kess V2 V5.017 only 165 EUR with free shipping

More information, please browse:http://www.carobd.de/wholesale/kess-v2-v5017-ecu-programmer-online-version.html

2017 New CGDI Prog BMW MSV80 Auto Key Programmer + Diagnosis tool+ IMMO Security 3 in 1

Jul26

CGDI Prog BMW MSV80 is a high technical tool which mainly doing Auto diagnose, programming and security maintenance support CAS4/CAS4+ All Key Lost and BMW Key Programmer with OBD Functions

Top 7 Reasons To Get CGDI Prog BMW MSV80:

1.High technical tool which mainly support Auto diagnose, programming and security maintenance 3 in 1.

2.Support Key Programming for BMW CAS1/CAS2/CAS3 ,and Support Key Matching and All key lost for CAS4 /CAS 4+;

3.Support BMW Key Programming with OBD Functions

4.Software response fast, short time programming, and new breakthrough in operation safety and technical support.

5.Supported Languages: Chinese, English

6. Certification: CCC,CE,GS, CCC,CE,GS,ISO

7. Warranty:1 year

Free update software:

001: CAS

002: CAS4 CAS4+

003: Engine EME

CGDI MSV80 BMW Car Key Programmer Support Module list:

1.BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching,KEY all lost matching,CAS computer replace,CAS3+/P4X above version can directly downgrade by OBD in 5 minus 100% safety.

2.BMW CAS4/CAS4+/Support key matching,support key all lost matching.

3.Support BMW key inspection,can check key what status in.

4.Support BMW engine computer DME replacement.

5.Support BMW MSV80/MSD80/MSD85/series OBD read ISN code (no need to split computer when matching key)

Exciusively support in Domestic

6.Support BMW Key unlock.

CGDI MSV80 BMW Car Key Programmer CGDI Functions:

1.Update in real time,products updated in zero cycle time,support model added in real time.

2.BMW CAS3/CAS3+Data repair–support change replace and split CAS computer,BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine change computer,ISN code reading and writing.

3.Equipment security greatly enhanced, the hardware anti-crack,anti-software copy.

[Promotion]2017 New CGDI Prog BMW MSV80 Auto Key Programmer, only 429 Eur

2017 New SKP1000 Tablet Auto Key Programmer Firmware update Steps

Jul26

Before update the firmware of SKP1000, please take out the TF card and insert into the card reader, then plug into the computer USB port. Double click “My computer”, find out :local disk(H:), right click to choose “Format”

Tip:Tick on the “Quick format”and click “start”

After complete format, go to the official website to downlode the update file, then copy and paste the file into the TF card, after finish, plug the TF card into the machine, power on the machine to the main interface.

Click on “Firmware update”

Firstly choose”system firmware update”, press”yes”then procedures shown below:

update successfully shown as below

Press”No” to back

Choose”Adapter firmware update”, after finish, reboot the machine to go on use SKP1000

Done.

More information, you can visit:http://www.carobd.de/wholesale/skp1000-tablet-auto-key-programmer.html

[Big Sale] 2017 Digimaster 3 III Original Universal Odometer Correction Master Update Online No Tokens Limitation

Jul26

Original Digimaster 3 Mileage Correction Master ONLY 875 EUR

Buy Digimaster iii for 7 reasons:
1 Newest version: V1.8.1703.14, no need activate, device has been activated and regsitered well before shipping

2 D3 is the BEST odometer tool for universal car,it can change mileage for ford,bmw,toyota,benz,vw,audi,volvo,renault…from 1996-2015.

3 100% original and Online update.No tokens limited.

4 Besides odometer correction,Audio decoding,AIRBAG,ECU PROGRAM,IMMO TEST…It can do programming key for Benz &BMW.

5. We offer all life long Free update!NO cost!!!
You can update digimaster every 3 month.No need other pay.

6 Digimaster 3 (D3) includes all functions of Digiprog3 (DIGI3)!
Besides, D3 adds the Benz/BMW/Porsch key programming function.
Also D3 supports to adjust the instrument on BENZ new models via OBDII diagnostic connector directly, such as W221, W164, W251, W216, W204, W212.

7 This version is unlimited tokens, but in few parts,you still need buy some tokens from us :
A. All present cars have unlimited tokens
B. For new added cars or CPUs,you should buy tokens in future.
C. For new added chips for present cars,you don’t need buy tokens.
(factory is holding promotion, buy digimaster iii will get 200 tokens for high-end vehicle for free)

How to update Digimaster III D3 mileage programmer?

Step 1. plug the power supply to digimaster3 and insert the network cable into the LAN interface of digimaster3.

Step 2. select “Management”

Step 3. select “Update”

Step 4. select “Software Upgrade”

Step 5. update in process

More information, you can visit:http://www.carobd.de/wholesale/digimaster-3-digimaster-iii-original-odometer-correction-master.html

MPPS V21 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable Support Checksum and ECU Recovery Function

Jul26

MPPS V21 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable is a powerful programming tool, offers general reading/writing operations and checksum support, it also includes excellent recovery functions

This module adds support for advanced functions on Marelli ECU’s.
MPPS covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic and many others.

Software version: V21
Firmware version: 1.09.03

Warranty: one year

Supports Multi-language:

More information, you can visit:http://www.carobd.de/wholesale/mpps-v18-main-tricore-multiboot-with-breakout-tricore-cable.html

[Promation]2017 Original Yanhua V1.8.1703.14 Digimaster 3 III Original Universal Odometer Correction Master Update Online No Tokens Limitation

Jul21

Digimaster 3 Digimaster III Original Odometer Correction Master works with various types of adapter you can easily achieve odometer correction by remove dashboard.Besides mileage function,it also can do Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz &BMW etc. Keep free updating online.

Buy Digimaster iii for 6 reasons:
1 Newest version: V1.8.1703.14, no need activate, device has been activated and regsitered well before shipping

2 D3 is the BEST odometer tool for universal car,it can change mileage for ford,bmw,toyota,benz,vw,audi,volvo,renault…from 1996-2015.

3 100% original and Online update.No tokens limited.

4 Besides odometer correction,Audio decoding,AIRBAG,ECU PROGRAM,IMMO TEST…It can do programming key for Benz &BMW.

5. We offer all life long Free update!NO cost!!!
You can update digimaster every 3 month.No need other pay.

How to update Digimaster III D3 mileage programmer?

Step 1. plug the power supply to digimaster3 and insert the network cable into the LAN interface of digimaster3.

Step 2. select “Management”

Step 3. select “Update”

Step 4. select “Software Upgrade”

Step 5. update in process

More information, you can browse:http://www.carobd.de/wholesale/digimaster-3-digimaster-iii-original-odometer-correction-master.html

www.carobd.de offers you only 1049 EUR, enjoy shopping!!!

Professionale DPF+EGR REMOVER 3.0 Lambda Hotstart Flap,O2, DTC 2 SOFTWARE FULL

Jul20

As we all known, the DPF often need to maintenance to keep ECU in good condition. Recently, we released a professional DPF+EGR REMOVER 3.0 Lambda Hotstart Flap,O2, DTC 2 SOFTWARE FULL to modifying DPF \ FAP – EGR – FLAP-DTC.The package includes 2 FAP + EGR software with many other solutions included.

Top 7 Reasons to Buy Software for Modifying DPF \ FAP – EGR – FLAP-DTC:

1. The software is compatible with FGTECH Galletto, KESS V2, KTAG Master, MPPS, CMD ect. Readers – file writers who work 100% with these programs.
2. Professional DPF-EGR programs supported for 100% binaries.
3. Bosch, Siemens, Denso, Visteon, Delphi, Marelli, Transtron ECU are supported !!
4. Supported by WinXP to Win8.1, Win10 (32 + 64 bit)
5. Video tutorial here: Video
6. Multi-languages Supports: English, German, French, Spanish, Italian, Turkish, Slovak – Czech, Romanian, Portogues, Polish, Dutch
7. Note: We do not need to ship the parcel, software sent by mail, send us code to activate DPF and EGR license,free activation once, follow-up activation requires 20USD once

More information, please browse:http://www.carobd.de/wholesale/dpf-egr-remover-lambda-hotstart-flap-o2-dtc2-software.html, ONLY 89EUR, no need to ship, very fast.

Value Bundles Kess V5.017+Ktag V7.020 Unlimited Tokens ECU Programmer with Free ECM TITANIUM V1.61 Software

Jul19

CarOBD.de offer you Value Bundles Kess V5.017+Ktag V7.020+ECM TITANIUM V1.61 Software, Kess V5.017 is perfect for OBD use, while Ktag V7.020 is perfect for Jtag, BDM and all the Boot application (tricore and ST10). This bundles is best match for ECU Programming, of course, help you save much money.