Carobd.de is 7 Years Old. Here we hold 7th Anniversary Promotion to thanks for both regular and new customers.
The First Wave, from 7th Sept. to 17th Sept.
Storewide 7% off Sale
Notice: No other Coupon Code can Use
Shopping Now,Save More Money
Topic: Renault CAN clip V170 free download, bugs fix and setup installation.
Renault CAN clip V170 free download on Mega:
key: !a94JfYiSSSwL4HGwmCfpmK4u5_l377wEJKQVczCdiZ8
PS: Not confirm if it is available forever
Renault CAN clip V170 on sale:
http://www.carobd.de/wholesale/renault-can-clip-update-software-cd.html
9.9 EUR free shipping, tested 100% works, safe without virus.
Renault CAN clip V170:
No new vehicles but fix some bugs, details shown as below picture.
Renault CAN clip V170 software compatible interfaces:
Most popular can clip interface 99 EUR
Best quality can clip interface with AN2135SC AN2136SC 129EUR
Best quality can clip interface with AN2131QC Chip 117 EUR
Other interfaces try at your own luck.
Can CLIP V170 Test Report:
■OBDII diagnostics…(OK)
Cover Renault car from 1998-2016, accessible to ENGINE, automatic gear shifting, Air conditioning system, SRS, ABS, ASR, MPL, GM, IMMO, KEYZESS GO system, OBD-I I and so on.
■Renault can clip reprogramming (OK)
Clip will tell you if there is a new version to install, depending on what version of Renault reprog you have… if you do not have reprog, the only way to find out if there is a new version, is to with a diagnostics machine read the actual version installed. As for the benefits, new versions are usually released to resolve glitches that have been in the mean time discovered, to improve drivability, fuel consumption etc… also as the engines get worn and old, new software can adjust things to make is drivability a bit better… most of the times you will not see any difference after a software update, unless a real obviously glitch has been identified and a new version has been released to resolve it. I hope all the above makes some sense, and somehow answers your question…
■Renault can clip key programming & ECU programming (No luck with can clip V170)
The Renault-COM diagnostic programming tool is verified ok to perform key programming and ECU programming.
Renault Can CLIP V170 setup on WIN7 32bit:
Important Notes:
Operating System: Win7 32bit
Step 1: run Crack Renault CLIP
Insert CAN CLIP 170 disk E: and open it
Copy the folder Activation(Patch V3) to Desktop, then open it
Open Crack Renault CLIP registration entries: Merge
Register Editor: click Yes.
Click OK.
Step 2: install Renault CLIP 170
Run setup.exe
CLIP V170 is running automatically
Click the laptop icon (FIRST INSTALLATION) in CLIP V170 interface.
Click on “I accept…agreement” and click Next.
Select country. (here, select OTHER COUNTRY). and click on Next.
Select a setup language and click Next.
Manufacturer: Renault. click Next.
Click Next to begin copying files.
Installing clip…
Updating your system…
Next to install Windows Resource Kit Tools
Click on “I agree” then Next
User information: Next
Install now
Installing progress…
Finish to install Windows Resource Kit Tools
RESTART your computer
Installing/extracting…
Extracting 100%
RESTART your computer
Finish installation of CLIP 170
Renault can clip installation success
Step 3: setup CLIP properties
Open CLIP properties on Desktop
Open file location:
Cut RSRWin application in local disk C:/ CLIP_X91/ Lib/ Application
Paste it on Desktop
Copy RSRWin application on Desktop/Activation (Patch V3)
And paste the RSRWin (from Desktop) in local disk C:/ CLIP_X91/ Lib/ Application
Close CLIP properties
Step 4: register CLIP
Run RSRWin application in local disk C:/ CLIP_X91/ Lib/ Application
Accept the license and register CLIP
Are you part of the Renault Network? Select No.
Enter the unlocking code with the picture guide Renault Clip Registeration Step 4 in the folder Activation(Patch V3)
then click Confirm.
Registration successful: click OK.
Replace “RSRWin” in C:\CLIP_X91\Lib\Application with”RSRWin” on Desktop
Step 5: install Renault can clip 170 driver software
Wizard helps install software for 1B-Alliance Vehicle Communication Interface
Select: Install…automatically
Next
Finish installation of software for 18B-Alliance Vehicle Communication Interface
Open Computer management
Select 1B-Alliance Vehicle Communication Interface
Step 6: open Renault CLIP v170 to begin diagnosis
Run CLIP Renault software
There will be a computer security alert. Just click Unlock.
Done
The hot CGDI PRO is able to make key on BMW 3 series FEM system. Here attach several pictures to prove the truth.
Here we go
As you can see, it’s BMW 3 series FEM system with 433MHZ
Coding successfully
Complete procedure shown as below thumbnail
To have Emgrand 9s12 mileage correction, I use CG100 PROG III. The old value is 30097KM, and the new value is 130193KM.
Here we go.
Attach pictures:
Connect CG100 PROG III main unit to BDM+4 adapter and then to the dashboard of Emgrand 9s12.
Backup the data
Old value
New value
This is just a general procedure on Emgrand 9s12 mileage correction using CG100 PROG III.
Have one CG100 PROG III, you may understand it more clearly.
This post is on how to use SKP1000 tablet key pro to program 2015 Buick Excelle remote key.
Buick Excelle after 2013 comes with 70 big capacity chip which needs security code to program key.
The way to get security code is on the frame which is as the same as new Lacrosse and new Regal.
Step by step procedure:
Please be informed: the pictures comes from the Chinese version Lonsdor CI600 plus, and the words on the pictures are Chinese. Acutally the SKP1000 engineer ensure SKP1000 can perform the same as CI600, and the instructions on the screen are translated as the title.
Tap “program key on Buick Excelle after 2013”
Tap ” Immobilizer”
There are 3 options : delete key (to disable the lost key), add key and program remote controller
Tap “add key”, the original car has 2 working keys
Turn off ignition for 5 seconds then turn on, press “Yes” to continue.
The security code is: 8352
Indentifying the security code, 5 minutes left.
Configuring system, please wait 10 minutes.
Turn off ignition, press “Yes” to continue.
Turn on ignition
Please pull off the key, press “Yes” to continue.
Configuring system, please wait 45 seconds.
Add key on 2015 Buick Excelle successfully with SKP1000 tablet key pro.
After the chip program successfully, back to tap “program remote controller”, it also needs the security code and the procedure is as the same as to program the chip.
Download V4.6.1 VVDI PROG with bugs fix & add types/models
https://mega.nz/#!jxBFTCwb!jsFwimypcOIkrKhEheg8H3xmYutUspvtAxtK37exgy4
password:123456
this .zip file includes:
If you bought one Original Xhorse VVDI PROG Programmer from
www.carobd.de, now go to update by yourself and add below types / models. Feedback if any question.
v4.6.1 VVDI PROG update content (2017-08-30)
V4.3.0 VVDI2 newly add BMW FEM/BDC system key learning, erase key; Add BMW FEM/BDC system reset KM; Add FEM/BDC system backup coding, restore coding.If you have VVDI2 Full or VVDI2 BMW,how can you get VVDI2 BMW FEM/BDC authorization?
There are two ways to get VVDI2 BMW FEM/BDC function:
1.Purchase from us.This is what we will introduce in our blog.
2.Remote points exchange.If you have condor key cutting machine,6000 points.If without,8000 points.F
How to add VVDI2 BMW FEM/BDC Authorization?
If you have condor key cutting machine,please check VVDI2 BMW FEM/BDC Function Authorization Service For Condor Cutter Only
If do not have,please check:VVDI2 BMW FEM/BDC Function Authorization Service
After you purchase,please provide the following information:
VVDI2 Serial number,if you have some other Xhorse tool,please also provide us their serial number.
How to check VVDI2,VVDI PROG,VVDI MB Tool serial number?
Back of main unit,it shows the serial number,send them to us is OK.
How to check VVDI Key Tool serial number?
VVDI Key Tool back does not tag the serial number,you can check from the carton box.
Or if you can not find the carton box,please download VVDI Key Tool update tool software,connect VVDI Key Tool with computer,click device info,it will display serial number,format is :VK********.
When authorization is OK,we will send email to inform you.Then wait more than 30 minutes,update vvdi2 firmware.P;lase confirm you use newest VVDI2 software,update vvdi2 firmware.
Xhorse VVDI2 key programmer V4.3.1 software released BMW FEM/BDC system key programming function.
https://mega.nz/#!SoYC1Q6a!hcskAhiMXQdGV1Bc-1I-tMTSRZubodozGkY_bUsKzUc
FAQ:
Q: After activation the fem bdc it will work without tokens？
A: Yes.
VVDI2 – BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding
Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if ‘get key info’ the type not support, it will show:customer should use “BMW E-sys software” program FEM/BDC system.then programming FEM/BDC system with VVDI2 BMW
4.when operation on ‘programming FEM/BDC system’interface,please don’t close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use “BMW E-sys software” coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.
If your vvdi2 already bind to condor,then BMW FEM/BDC =510 EUR
without condor: BMW FEM/BDC = 680 EUR Pls note:
1.Your vvdi2 must already has BMW OBD functions
2.After payment, pls give us serial number of VVDI2 and condor(if you have)
Why should any Tuner, Locksmith, Specifically BMW + LandRover + Mercedes Benz specialist, Tango transponder programmer users should get Xhorse VVDI Prog programmer, full story below.
Ever since the good old Rosfar R-260 programmer development project was abandoned back in 2009 nothing compared to it’s reliability managed to complete the task, although many Chinese + European websites continued to promote Rosfar R-260 programmer as if it was still alive where the reality is that the Italian maker was long gone,
until VVDI Prog showed up last year, dear technicians we’ve demonstrated below VVDI Progunbelievable unbeatable Coverage list + Lifetime free updates, clearly it’s a must have 😉
BMW E SERIES ECU,s
MEVD17(N55)
MEVD1724(N20)
MEVD1726(N55)
MEVD1729(N20)
BMW F SERIES
MEVD172(N55)
MEVD1724(N20)
MEVD1725(N13)
MEVD1726(N55)
MEVD1728(N63/S63)
MEVD1729(N20)
MEVD172G(N55)
MEVD172P(N20)
MEVD172S(N55)
BOMBARDIER QUADROCYCLE(2011)
CHANGAN BENBEN MT20UED
DELPHI
ME20U2-XET256
ME20U2-XET512
MT20U2-MC912DT128P
MT20U2-2L33V
MT20UED
MT22-XEP768
MT60-XEP768
MT80(TC1766)
KIA ME17.9.11.1(TC1762)
MAGNETI MARELLI
IAW-6LP2.03
IAW-6LPA.01
RENAULT MODUS-XC164CS-32F
VOLKSWAGEN TriCore
EDC17_CP14(TC1796)
MED17.1(TC1766)
MED17.5(TC1766)
MED17.5.20(TC1766)
OTHER XP8000E-XET256
BOSCH ME7.9.7.1
VVDI Prog IMMOBILIZER
AUDI
BCM2 (D703379/F3381/3634)
A4L-BCM (1L15Y)
J518 (–2010) Masks (1L59W/3L40K)
J518 (2010–) Mask (0L01Y)
MERCEDES BENZ
All Electronic Ignition Switch EIS types expect W210 with 705/H05 2x MCU,s inside which can be Ignored
EIS/EZS-W203 (HC08)
EIS/EZS-W220 (HC08)
EIS/EZS-W639 (HC08)
EIS/EZS -W203 (HC12)
EIS/EZS-W209 (HC12)
EIS/EZS-W211 (HC12)
EIS/EZS-W219 (HC12)
EIS/EZS-W220 (HC12)
EIS/EZS-W230 (HC12)
EIS/EZS-W164 (ST12)
EIS/EZS-W169 (ST12)
EIS/EZS-W203 (ST12)
EIS/EZS-W209 (ST12)
EIS/EZS-W211 (ST12)
EIS/EZS-W215 (ST12)
EIS/EZS-W219 (ST12)
EIS/EZS-W220 (ST12)
EIS/EZS-W221 (ST12)
EIS/EZS-W230 (ST12)
EIS/EZS-W463 (ST12)
EIS/EZS-VANEO (ST12)
EIS/EZS-MAYBACH (ST12)
EIS/EZS- SPRINTER (2015–) (ST12)
BMW Late EWS4 + All CAS generations Exx & F01,F02,F10,F11 Series
EWS4.X All Masks
CAS2 Mask (2K79X/0L01Y)
CAS3 Mask (2K79X/0L01Y)
CAS3+ Mask (0L15Y/0M23S)
CAS4 Mask (1L15Y)
CAS4 Mask (5M48H/1N35H)
CHEVROLET NEW SAIL BCM (2013–)
STEC STEC IMMOBILIZER
CHRYSLER
300C Immo
DODGE-JOURNEY-WIN(2010)
FIAT IMMOBILIZER
FORD BCM-Masks 7S7T / 1L15Y
GM BCM3
GREATWALL
DELPHI-IMMOBILIZER
H2-BCM
INFINITI
BCM-XDT384 X Gate 9s12 Mcu
BCM-XEG384 X Gate 9s12 Mcu
LANDROVER
RANGE ROVER EWS(2004-08)
DISCOVER3-CEM
RANGE ROVER SPORT-CEM
LUXGEN BIG7-ICU(HC908GZ32)
JAGUAR SMARTKEY-0L01Y
NISSAN
BCM-XDT384
BCM-XEG384
OPEL
ASTRA DG128
ZAFIRA DG128
VECTRA(2004-08)
PORSCHE
BCM-1L15Y
BCM-2M25J
BCM-5M48H
BCM-1N35H Security protection bypass function tested
RENAULT
BCM-XDT384
BCM-XEG384
LAGUNA BCM (2010–)
SAICMOTOR
MG7 R
ROEWE750 R
VOLKSWAGEN
BCM-XEQ384
BCM2 NEC (D703379/F3381/3634)
ZHONGHUA H530-BCM-V1
FAW
BESTURN-B90-BCM
JIEFANG-J6-HCS300
JIEFANG-J6-BCM
BUICK
EXCELLE BCM (2013–)
EXCELLE GT BCM (2013–)
EXCELLE (2014)
JEEP GRAND-CHEROKEE-IMMO Mask (0L72A)
LEOPAARD CS10-IMMO
YEMA T70-IMMO
Immobillizer Related Modules
AUDI ESL-HC08GR16-V1
BENZ
FC-OPERATION-UNIT-W221
ISM-W221
KG-MODULE-W221 R Two Versions supported
LU-W221
REAR-SAM-W212
SAM-W221
BMW
DKG-MODULE(2008)
FRM-E-SERIES-XEQ384
FRM-F-SERIES-XET512
F-SERIES-SZL-MODULE
BUICK GL8-KG-MODULE
CHANGAN
RAETON-HVAC-MODULE(2013)
RAETON-KG-MODULE(2013)
CHEVROLET CRUZE-CD-PLAYER
DONGFENG FENGGUANG580-KG-MODULE
FORD FOCUS-BCM
GREATWALL
HVAC-MODULE(2015)
HAVAL-H9-4WD-MODULE
HYUNDAI IX35-ASSY-SMARTKEY-UNIT
JEEP TRUCK-LOCK-MODULE(2014–)
MAZDA RUIYI-KG-MODULE(2009)
RANGE ROVER RFA Marked O & X V1,V2,V3
VOLKSWAGEN
GOLF6-PDC-MODULE
MAGOTAN-EPB-MODULE(2013)
NEW-JETTA-PDB-MODULE
NEW-SANTANA-PDB-MODULE
PASSAT B6-PBCM
LANDROVER
ATCM
RFA-V1
RFA-V2
RENAULT
CLIO3-EPS-XC164CS-32F
CLIO3-EPS-ST10F269
SACHS CDC-XC164CS-16F
Here is user working experience of original Xhorse VVDI Prog programmer on BMW cars. (Here talking about BMW only).
Tested by me: cas 2, cas 3, cas 3+, Cas4 5m48h, volvo cem v40
all ok.
Is a very good tool and for bmw cas4 .
I tested today D80 and a m35080v6, and they work perfect.
Mine erased D160 (BMW F01 dash) with no problem.
Tried to renew bmw e series 868 key. Vvdi programmer claimed operation success but in tango key is now recognized as transponder type A. locked
I did renew 2 keys! Both worked and now are programmed to cars!
Only thing you need to disconnect from PCB is battery while writing the renew file. (Remove the batteries)
Renew BMW series E 868 key – 100% OK z vvdi-prog v4.5.7
FRM3 works perfectly
More EDC17 under ECU section would be great!
Especially BMW EDC16 and EDC17 for ISN purposes.
BMW F series FEM module reading but for that i can only dream about…
BMW BMSX bike ECU would be great…
Renew pcf7946 and 29f family
Renew E series remote with pcf7942 / pcf7944 would be fine
Unlock and download the 9S12G128 secure without erasing it first would be nice .
erasing all 35080s and d80 with soic clip would be super nice too!
I read the CAS3+ MCU with VVDI Prog and that worked perfect.
BMW FRM3 series Exx – READ and WRITE – OK
BMW KEY series Exx – OK
BMW DashBoard 6WB 160DQWT – READ , ERASE , WRITE – OK
test vvdi prog v4.5.7
