V4.3.0 VVDI2 newly add BMW FEM/BDC system key learning, erase key; Add BMW FEM/BDC system reset KM; Add FEM/BDC system backup coding, restore coding.If you have VVDI2 Full or VVDI2 BMW,how can you get VVDI2 BMW FEM/BDC authorization?

There are two ways to get VVDI2 BMW FEM/BDC function:

1.Purchase from us.This is what we will introduce in our blog.

2.Remote points exchange.If you have condor key cutting machine,6000 points.If without,8000 points.F

How to add VVDI2 BMW FEM/BDC Authorization?

If you have condor key cutting machine,please check VVDI2 BMW FEM/BDC Function Authorization Service For Condor Cutter Only

If do not have,please check:VVDI2 BMW FEM/BDC Function Authorization Service

After you purchase,please provide the following information:

VVDI2 Serial number,if you have some other Xhorse tool,please also provide us their serial number.

How to check VVDI2,VVDI PROG,VVDI MB Tool serial number?

Back of main unit,it shows the serial number,send them to us is OK.

How to check VVDI Key Tool serial number?

VVDI Key Tool back does not tag the serial number,you can check from the carton box.

Or if you can not find the carton box,please download VVDI Key Tool update tool software,connect VVDI Key Tool with computer,click device info,it will display serial number,format is :VK********.

When authorization is OK,we will send email to inform you.Then wait more than 30 minutes,update vvdi2 firmware.P;lase confirm you use newest VVDI2 software,update vvdi2 firmware.

Xhorse VVDI2 key programmer V4.3.1 software released BMW FEM/BDC system key programming function.

1. Bugfix

Notes: for 4.3.0 software users just download 4.3.1 can use directly,no need update firmware again.https://mega.nz/#!SoYC1Q6a!hcskAhiMXQdGV1Bc-1I-tMTSRZubodozGkY_bUsKzUc 

FAQ:
Q: After activation the fem bdc it will work without tokens？
A: Yes.
VVDI2 – BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)

1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if ‘get key info’ the type not support, it will show:customer should use “BMW E-sys software” program FEM/BDC system.then programming FEM/BDC system with VVDI2 BMW
4.when operation on ‘programming FEM/BDC system’interface,please don’t close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use “BMW E-sys software” coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.

If your vvdi2 already bind to condor,then BMW FEM/BDC =510 EUR
without condor: BMW FEM/BDC = 680 EUR  Pls note:

1.Your vvdi2 must already has BMW OBD functions
2.After payment, pls give us serial number of VVDI2 and condor(if you have)

BMW FEM/BDC Authorization for VVDI2 (With Condor)

BMW FEM/BDC Authorization for VVDI2 (Without Condor)