Archives

VVDI MB TOOL Key Programmer Update to V2.0.7

Feb29

Original Xhorse VVDI Benz VVDI MB TOOL Key Programmer Including BGA Calculation support BE key,read password and prepare new key via IR and support all Benz Keys, but dont support Benz Key Lost.

 

The Update Information of VVDI MB TOOL key programmer

 

===== BENZ V2.0.7 =====
1. Attention: All user update device to firmware v2.0.7, software v2.0.7, the lower version dont support password calculation
2. User manual v1.2 released, overview v1.3 released
3. Add support for renew ECU/Gearbox/ISM etc
4. Fix diable key in K-Line protocol
5. Fix clear TP in K-Line protocol
6. Fix read key bug in password calculation
7. Bugfix

xhorse-vvdi-benz-tool-including-bga-calculation-blog-1

 

You can download the software on below link:

https://mega.nz/#!flBkTKIJ!vbpzLfkIBbKFTb4e3P3ghWnnT0nRBNwyU4kUs_HCH1I

 

 

 

VVDI MB BGA Tool V2.0.6 Key Programmer

Feb2

VVDI MB Tool is powerful Mercedes Benz Key Programmer, can calculate Benz BGA key password and add new BGA Keys, support all Benz keys after year 2011. Newest Update VVDI Benz can read EIS under OBD mode will check car power automatically. Avoid lost data in EIS

VVDI MB BGA Tool highlights:

1. Newest version: V2.0.6
2. Update online
3. VVDI Benz can calculate Benz BGA key password and add new Mercedes BGA Keys

4. VVDI MB Tool support all Benz keys after year 2011
Customer feedback on VVDI Benz BGA tool:

 

VVDI-MB-Tool-support-all-Benz-keys-after-year-2011

1. i test password from 212 new model super
good tool need pay 2 tokens
need 10 min all ok
2. Do you have see video of this tool?
They say can do all key lost on w212.
No tool can do it even Mehaco or nec pro51.
w212 eis on video, sure it can.. mehaco/mercedesinstrument can do all keys lost on w212.. the option is availible a few months..
Tips on VVDI Benz:
1. If you have IKEYCUTTER CONDOR XC-007 or iKeycutter CONDOR XC-MINI Key Cutting Machine, please buy SK185-B
We can calculate password once for free everyday, if you need more in the same day, you need pay 35.00USD/Once

2. One cutting machine can only bind with one SK185-B,if you want to buy several SK185-B,you should also buy corresponding cutting machine,or you should buy SK185

3. If you do not have IKEYCUTTER CONDOR XC-007 or iKeycutter CONDOR XC-MINI Key Cutting Machine, please buy SK185
The password calculate cost is 35.00USD/Once, collect need about 4 mintues, calcuate need about 2 mintues

Xhorse VVD MB BGA TOOL Function introduction
1.support BE key, read password and prepare new key via IR.
2.NEC V051, V057 support on board get password
3.All NEC keys support on board write and erase
4.password calculate:support BGA keys, NEC keys(include 51, 57version)etc.,work fast.
5.support renew EIS and ELV
6.support write EIS and ELV
7.support online generate key file
8.unlock ELV function will be released soon.
9.Renew other control modules function will support soon
Latest Technical details :
Note: VVDI MB BGA tool update goes well, the following workable models are for reference only.
Model support IR/OBD:
W164, W164 2009+
A166, W197,W212, W218, A246
A169, W209, W211
W172, W204, A207
W203
W204, W207, W212 only by dump
W209 only by dump
W210
W215, W220
W230
W216
W221
W906
Keys version supported:
v03, v06, v08
v05, v07, v09
v59,v61
Two adapters: one for versions 28, 35, 40, 51, 57, another one for version 59.
VVDI MB TOOL V2.0.6 Newly Update(2016-01-16)
*** Require firmware V2.0.6
===== BENZ V2.0.6 =====
1. Attention: All user update device to firmware v2.0.6, software v2.0.6, the lower version dont support password calculation
2. User manual v1.1 released, overview v1.2 released
3. Add support for disable key
4. Fix bug for test W164, W221 EIS status
5. Fix bug for write EIS data
6. Bugfix
This is from Auto Key Programmer technical support :http://www.carobd.de/wholesale/xhorse-vvdi-benz-tool-including-bga-calculation.html

Xtool X100 PAD Tablet Active Procedure

Dec17

About Xtool X100 Pad Tablet

The first tablet key programmer in the word. Xtool X100 PAD performs key programming, mileage adjustment, oil service light reset, timing belt service light reset, tire pressure warning light reset , EPB reset, throttle body reset, DPF reset, battery reset, steering angle calibration and OBD-II engine diagnosis.

Xtool X-100 PAD Activation

Note: please activate X-100 PAD before you use it to test vehicles.

Read Xtool X100 Pad Tablet Active Procedure as follows.

Procedure:

Connect X100 Pad Tablet to the internet connection.
Boot X100 Pad Tablet, go to X100 pad user interface. Fill in personal information
Including activation code, product serial number (each device will have a serial number and activation code), nickname (workshop’s name or user’s nickname), login account (can be your email address pr cell phone number) and password, the system will then save it. Activation is a onetime process. The diagnostic application will start after activation.

x100-pad-active-01
Note:

1.The required “Activation Code” is printed in the user manual shown as following red -circled number.

x100-pad-active-03

2.Take down your password, not lost it, otherwise it will take you some trouble.

Xtool X100 PAD Main Interface

Tap on X-100 PAD application icon, the main interface and sub-menus will be shown as below.

xtool-x-100-pad-tablet-key-programmer-4

Diagnostics: open the X-100 PAD diagnostic application. It can read diagnostic information, view live data, perform actuation tests and special functions etc.

Diagnostic Report: Users can view all the diagnostic reports and diagnostic data generated in the diagnostic process.

Setting: Users can access the language setting and other system related settings.

Xtool Cloud: online communication Platform for X-100 PAD users.

Update: after connected to the internet, you can download the latest diagnostic software directly to the X-100 PAD.

Remote Diagnosis: Users get remote assistance from Xtool Technical Assistance Center.

Original iKeycutter CONDOR XC-MINI Master Series Automatic Key Cutting Machine

Nov10

iKeycutter CONDOR XC-MINI Master Series Automatic Key Cutting Machine

7” Capacitive Touch Screen
With Built-in Database, can easily find key information
Software supports online-update

iKeycutter CONDOR XC-MINI Highlight Characteristics
1. Built-in Database
2. Support Multi-languages: Portuguese/Spanish/French/Germany/Russian/Czech/Arabic/Turkish/Dutch/Polish/Bulgarian/Norway/Slovakia/Italian/English/Chinese
4. 3-Axis Precision Ball Screw Transmission
5. Cross Rail
6. All Aluminum Machine Body
7. Single machine with both Tracer/Cutter
8. Standardly include three clamps M1/M2
9. Software supports online-update
10. Support Sided/Track/Dimple/Tibbe keys
11. Some Dimple/Tibbe keys need optional clamps
Condor XC-MINI Specification
Input voltage: 90V-264VAC
Input frequency: 47-63Hz
Consume: 200W
Package Dimensions: L450xW450xH350mm
Machine Dimensions: L265xW362xH301mm
Display: 1024×600
Spindle Speeds: 900rpm
USB: USB2.0
Working Temperature: 0-50℃
Humidity: 10-90%
Net Weight: 18Kg
original-xhorse-ikeycutter

Toyota G and Toyota H Chip Vehicle OBD Remote Key Programming Device

Nov2

Toyota G and Toyota H Chip Vehicle OBD Remote Key Programming Device

toyota-g-h-chip-obd-remote-key-programming-device-1

Toyota G and Toyota H Chip Key Programmer Description:
Apply to 4D67,68,72(G), support both G and H chip, test on 2015 Camry.
Toyota add remote control
Get in the car and close the door, insert the key and turn the key on, insert the device into OBD.
After the sound(Dee-), it will start to add the remote control.
After the sound ( Dee- Dee-),open the door, when hear the sound blaring. Press ‘ lock & unlock’ key at the same time.
And press the’ lock’ key. If the blaring end, It’s OK.
Note:  Switch is on the right.(add remote control)
Toyota add transponder:
Get in the car and close the door, insert the main key into the lock and turn the key on,and then insert the device into the OBD.
If it will sound twice, it will start to add transponder.
After the sound (Dee-Dee-), 2-3 minutes later, anti-theft light is on.
And then remove the key( anti-theft light will flash), insert the new key and doesn’t need turn the key,
anti-theft light will be off later.
Note: switch is on the left.( add transponder)
Package including:
1pc x   Toyota G and H OBD Remote Key Programmer