Archives

Clone Orange 5 Review: Works Perfect as an Original

Clone OEM Orange 5 programmer reviews:

Working good/bad? full chip covering or only partial???

 

Here is Orange 5 and the copy feedback from users.

 

I have it for a long time and for now everything is working properly.
One of the few clones that works well and works as an original.
Some adapters are not supplied and must be purchased separately

 

So far its reading and writing (with verify) all eeproms i try. Good tool so far.

 

I like PIN checking function (test insertions) very much .It saved my job a lot of time.
In combination with my UPA -S, Carprog, and TL866 programmer a lot of job can be done successfully .

 

Great programmer. All that is stated works. If the speed of exchange is not important, you can do a lot. Many good calculators

clone-orange-5-review-works-perfect-as-an-original-1

I have it 5.7 too and work perfect iven on win 10 x64..cas4-cas4+ and many more done no problem.. I also want to buy orange5

 

I buy Orange5 china clone. Work great. Now i check in hc05b8, hc11e9, and eeproms. All read and write very fast.

 

It’s almost the same as the price on the Orange website. Besides – on the webpage is written OEM.
Clone but includes – Immo HPX 9V0
confirmed that oem orange 5 comes with immo hpx 9.0 and adapter set

 

On Hc908az60 secured it work’s good.
I have 4 secured mcu, and they work ok.
I have tried 68hc11, a lot of eeproms, and it work’s just perfect.

 

have clone and work perfect. I pay 230usd
2j74y ok
35080 ok
Tms immo opel ok
Hc05 immo old vw ok

 

I have Orange 5 clone and everything works perfect for now.
I tested with 1J35D,4J74Y,1D69J,0D69J,0F82B,3K91D,TMS370c702

 

It is Clone but I confirmed that oem orange 5 comes with Immo HPX 9V0 and adapter set
The original Orange5 with adapter + same software around thousand dollors
Right got this in today. Software is very easy to install.

all functions open 1 – 10 exept car radio get error
tested reading usual eeproms all good
tested tms370 with adapter board did not read so maybe bad adapter board

tested immo login code from dump ,tms vw works

will test as i go

but there is one thing you should noticed
Well the original does not work with PSA so I don’t think the clone will

 

I read today 1d69j adapter success

 

this is a clone by the look of things and from downloading their software they have immo software and NEC software but only a couple from the radio software.

Here is all the immo images from their software if anyone wants them;
https://mega.nz/#!eoNQQaRA!u1r5kYYjtl2VXDuh8W5Fh39m_1J6IsW7C-cZHssurgw

 

 

TIP: Orange 5 Original vs Clone:

Do not get confused by Orange pricing. Orange charge separately for the device, the immo software, the airbag software and the radio software, plus a few specials.
All this comes with the clone.
To compare the two, you must add up all the costs from Orange. There is a very large saving if you buy the clone. But you cannot update it and you have no support from Scorpio. It will suit some people for sure. The adapters are poor quality, and for many the hardware does not work. No doubt as time goes by will will see huge threads about how to fix them. The company who makes it does not have a good reputation for quality or support.

I do not regret buying original Orange5 and Tango key programmer. But when I did there were no clones available as an alternative.

As for the Tango clone, it’s PCB and components are nothing like the original, and of a very poor quality. I have not seen inside an Orange5 clone yet.

[Good News]LED BDM Frame with Mesh and 4 Probe Pens only 44.99 EUR with Free Shipping

2017 New BDM Frame with 4 Probes Mesh and LED Full Kit is designed to work with Kess V2 Ktag Fgtech Galletto BDM100 ECU Programmer, New BDM Frame with Adapters is more user-friendly than Old BDM Frame

led-bdm-frame-with-mesh-and-4-probe-pens

LED BDM Frame Descriptions:
1.It is Made by Acrylic board, with Mesh and 4 Probe Pens.
2. LED works for 12V. After you connect with the probe, disconnect 12V battery for LED,it will work.The probe pin is adjustable.
3.This LED BDM FRAME is the best bracket for ECU Update/ECU Brush and Write/ECM Modified and programming/Probe holder/Dimsport aids.
4. Work on KESS,KTAG,FGTECH,BDM100,KTM100,CMD, DIMSPORT AIDS…ECM Chip Tuning Tools.
5.It is easy to use,much better than old bdm frame.

LED BDM Frame with Mesh and 4 Probe Pens Only need 44.99 EUR with Free Shipping.

[Value Bundles]2017 V2.23 Kess V2 Firmware V5.017 Online Version Plus V2.23 KTAG Firmware V7.020

Online Version Kess V2 Firmware V5.017 support online service, can work with interent, no tokens need, newly add 140+ protocols.Ktag SW V2.23 Firmware 7.020 Master Version ECU Programmer newly add 100+ ECU type models. Available Protocols for K-TAG: BDM MOTOROLA MPC5xx. Operation convenient, automatically recognize ECU model, high stability. What’s more, this package offer saves you money than buying them alone.

kess-v2-firmware-v5017-plus-v223-ktag-firmware-v7020_2017080172062833

This package including: Kess V2 V5.017 Online Version and V2.23 KTAG Firmware V7.020

Kess V2 V5.017 Highlight:

1. Multi-language support: English, German, Spanish, Italian, Portuguese, French.
2. Newest software: Ksuite V2.23
    KESS V2 V5.017 is with encrypted USB dongle, program safer and more stable!
    KESS V5.017 software is very easy to install, just click, Next Step, then it will work fine!
3. Latest and Best Firmware V5.017:
    KESS V2 V5.017 supports more 140 types of vehicles and protocols than KESS V2 V4.036
    KESS V2 V5.017 supports all protocols such as EDC17/k-line/DSG/DQ200 DQ250 DQ500 Gearbox/ST10 ….,No gray protocols anymore!
4. Online Version Kess V2 V5.017 is able to connect internet!!! Support online service!!!
5. 100% No Tokens Need for all vehicles, no tokens reset button, you can use Kess V5.017 for lifetime
6. Kess V2 Ksuite V2.23 Firmware V5.017 cover all major brands and protocols including Line, KAN, EDC17 and MED17 and for Ford J1850.
   KESS V2 V5.017 can support cars/trucks/tractors/bikes! KESS V2 supports vehicles accroding to engine. So V5.017 KESS V2 can support new vehicles!
7. Works on Win XP / Win7 32bit, Win 8, etc.
8. Kess V2 V5.017 with a very affordable price, can read and write ECU via OBD2 port directly, no need to disassemble ECU from the car, easy to use.
Ktag SW V2.23 FW V7.020 Highlights:
1. Latest Software: Ksuite V2.23
2. 2017 Latest Hardware: Firmware V7.020
Add New File type (FENDT/JCB/VALTRA TRACTOR BOSCH EDC17CV41 SISU ENGINE CAN
      Newly Add BMW Gasoline F Chassis and Mercedes W222
      Many encrypted new car models works: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU,Toyota 76F
      100+  ECU Types added
KTAG Firmware V7.020
3. Multi-Language Support: English, Italian, Deutsch, French, Portuguese, Spanish(If you need other languages, please feel free to contact us)
4. Support BDM Function Well, no checksum error, available Protocols BDM MOTOROLA MPC5xx
5. Support both Car, Motorcyle and Truck ECU Programming
6. No tokens need any more
8. Update: By CD or Download link only. (I can give you a link to download newest version of ktag software)
9. If you have ever bought these ktag ecu programmer sold on our website: HKSE80(SE80-C), SE80-BSE80-CSE80-E
you are offered to buy Latest Ktag firmware 7.020 main unit alone, it can work with the accessories of above k-tag programmer together
www.carobd.de offers only 325 EUR with Free Shipping!!!

2017 LED BDM Frame with Mesh and 4 Probe Pens for FGTECH BDM100 KESS KTAG K-TAG ECU Programmer Tool

2017 New BDM Frame with 4 Probes Mesh and LED Full Kit is designed to work with Kess V2 Ktag Fgtech Galletto BDM100 ECU Programmer, New BDM Frame with Adapters is more user-friendly than Old BDM Frame

No PCB in this package! LED works for 12V. After you connect with the probe, disconnect 12V battery for LED,it will works.The probe pin is adjustable.

led-bdm-frame-with-mesh-and-4-probe-pens-1

LED BDM Frame Descriptions:
1.It is Made by Acrylic board, with Mesh and 4 Probe Pens.
2. LED works for 12V. After you connect with the probe, disconnect 12V battery for LED,it will work.The probe pin is adjustable.
3.This LED BDM FRAME is the best bracket for ECU Update/ECU Brush and Write/ECM Modified and programming/Probe holder/Dimsport aids.
4. Work on KESS,KTAG,FGTECH,BDM100,KTM100,CMD, DIMSPORT AIDS…ECM Chip Tuning Tools.
5.It is easy to use,much better than old bdm frame.

New Release:The Newest V2017.5 Professionale DPF+EGR REMOVER 3.0 Lambda Hotstart Flap,O2, DTC 2 Software Full

ADS Automotive Diag Solutions Software Pack come with ADS DPF+EGR Remover V2017.5 and ADS Lambda V2017.3 module. ADS Professional DPF+EGR Remover support multi-languages, can work following hot ECU Programmers: Kess v2, Ktag K-tag master, Fgtech Galletto and MPPS.

dpf-egr-remover-software-1

DPF/EGR/LOMBDA 3 in 1 DPF/EGR V2017.5 Lambda V2017.3 Need Activation
These programs, they are very easy to use even for a beginner, just select the right car and ECU.
If you have selected your car’s ECU, the program will automatically turn the DPF or EGR solution off.

Top 7 Reasons to Buy Software DPF/EGR/LOMBDA 3 in 1:
1. You can use the current binary drives to start the ECUsFGTECH Galletto, KESS V2, KTAG Master, MPPS, CMD, Byteshoter Master and all binary readers / writers, 100% files working with these 3 programs.
2. Professional DPF-EGR programs supported for 100% binaries.
3. Bosch, Siemens, Denso, Visteon, Delphi, Marelli, Transtron ECU are supported!
4. Supported by WinXP to Win8.1, Win10 (only 64 bit)
5. Multi-languages Supports: English, German, French, Spanish, Italian, Turkish, Slovak – Czech, Romanian, Portogues, Polish, Dutch
6. Note: We do not need to ship the parcel, software sent by email, send us code to activate DPF, EGR and Lambda license, it is included one free activation, then it will cost 20USD each time.
7. No need for Internet, no account, no limit, unlimited files!

Software includ:
DPF/EGR V2017.5
Lambda V2017.3
One licence to 3 softwares
This software works in 3 steps:
1. Select car model
2. Load the file to repair
3. Save the final FIXED file.
All operations are performed by software automatically. Users just need to read – write files with well known equipment to ECU.

New Arrivals:2017 Online Version Kess V2 V5.017 No Tokens Need Kess V2.23 Firmware V5.017 Add 140+ Protocols

Online Version Kess V2 Firmware V5.017 support online service, can work with interent, no tokens need, newly add 140+ protocols. Kess V5.017 with encrypted USB dongle, program safer and more stable!

kess-v2-v5017-ecu-programmer-online-version

Kess V2 V5.017 Highlight:
1. Multi-language support: English, German, Spanish, Italian, Portuguese, French.
2. Newest software: Ksuite V2.23
    KESS V2 V5.017 is with encrypted USB dongle, program safer and more stable!
    KESS V5.017 software is very easy to install, just click, Next Step, then it will work fine!
3. Latest and Best Firmware V5.017:
    KESS V2 V5.017 supports more 140 types of vehicles and protocols than KESS V2 V4.036
    KESS V2 V5.017 supports all protocols such as EDC17/k-line/DSG/DQ200 DQ250 DQ500 Gearbox/ST10 ….,No gray protocols anymore!
4. Online Version Kess V2 V5.017 is able to connect internet!!! Support online service!!!
5. 100% No Tokens Need for all vehicles, no tokens reset button, you can use Kess V5.017 for lifetime
6. Kess V2 Ksuite V2.23 Firmware V5.017 cover all major brands and protocols including Line, KAN, EDC17 and MED17 and for Ford J1850.
   KESS V2 V5.017 can support cars/trucks/tractors/bikes! KESS V2 supports vehicles accroding to engine. So V5.017 KESS V2 can support new vehicles!
7. Works on Win XP / Win7 32bit, Win 8, etc.
8. Kess V2 V5.017 with a very affordable price, can read and write ECU via OBD2 port directly, no need to disassemble ECU from the car, easy to use.

2017 Online Version Kess V2 V5.017 only 165 EUR with free shipping

MPPS V21 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable Support Checksum and ECU Recovery Function

MPPS V21 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable is a powerful programming tool, offers general reading/writing operations and checksum support, it also includes excellent recovery functions

mpps-v18-main-tricore-multiboot-with-breakout-tricore-cable

This module adds support for advanced functions on Marelli ECU’s.
MPPS covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic and many others.
Software version: V21
Firmware version: 1.09.03
Warranty: one year

Supports Multi-language:

mpps-v18-language-1
mpps-v18-language-2
mpps-v18-language-3

Value Bundles Kess V5.017+Ktag V7.020 Unlimited Tokens ECU Programmer with Free ECM TITANIUM V1.61 Software

CarOBD.de offer you Value Bundles Kess V5.017+Ktag V7.020+ECM TITANIUM V1.61 Software, Kess V5.017 is perfect for OBD use, while Ktag V7.020 is perfect for Jtag, BDM and all the Boot application (tricore and ST10). This bundles is best match for ECU Programming, of course, help you save much money.

www.carobd.de offers you only 345 EUR, enjoy shopping!!!

kess-v5.017-ktag-v7.020-1

2017 Latest V2.23 KTAG ECU Programming Tool Firmware V7.020 KTAG Master Version with Unlimited Token

Ktag SW V2.23 Firmware 7.020 Master Version ECU Programmer newly add 100+ ECU type models. Available Protocols for K-TAG: BDM MOTOROLA MPC5xx. Operation convenient, automatically recognize ECU model, high stability.

ktag-frimware-v7020-ecu-programmer-with-renew-button

Ktag SW V2.23 FW V7.020 Highlights:
1. Latest Software: Ksuite V2.23

2. 2017 Latest Hardware: Firmware V7.020
Add New File type (FENDT/JCB/VALTRA TRACTOR BOSCH EDC17CV41 SISU ENGINE CAN
Newly Add BMW Gasoline F Chassis and Mercedes W222
Many encrypted new car models works: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU,Toyota 76F
100+ ECU Types added
KTAG Firmware V7.020
3. Multi-Language Support: English, Italian, Deutsch, French, Portuguese, Spanish(If you need other languages, please feel free to contact us)

4. Support BDM Function Well, no checksum error, available Protocols BDM MOTOROLA MPC5xx

5. Support both Car, Motorcyle and Truck ECU Programming

6. No tokens need any more

8. Update: By CD or Download link only. (I can give you a link to download newest version of ktag software)

9. If you have ever bought these ktag ecu programmer sold on our website: HKSE80(SE80-C), SE80-B, SE80-C, SE80-E
you are offered to buy Latest Ktag firmware 7.020 main unit alone, it can work with the accessories of above k-tag programmer together

Tips on using Ktag Firmware V7.020
1. Please Only Use Our Software
2. Operating System: Better to Use Win XP
3. Please Disconnect Internet While Using KTAG, Otherwise It Will Get Damaged
4. The only difference bettween item no. SE135-B and item no. SE135 is the outlook. They share the same functions and workable ECU tyeps.

www.carobd.de offers you only 179 EUR with free shipping

2017 Newest V2.23 KESS V2 Firmware V5.017 ECU Programming Installation on WinXP & ECU List

The following is the V2.23 KESS V2 installation guide and new KESS 5.017 ECU list by Ksuite 2.23 screenshots for you.

Note: KESS V2 Firmware V5.017 has token reset button so token unlimitied.

How to install V2.23 KESS V2 Firmware V5.017 on windows XP?
Before installation, please remember it can not connect the internet!

Step1:

1.1 Open Ksuite 2.23(E:) and run “Ksuite-222-v2″exe
kess-v2-firmware-v5017-ecu-programmer-pic-1
kess-v2-firmware-v5017-ecu-programmer-pic-2

1.2 When finish the setup, click”Next”, “Next” then “install”

kess-v2-firmware-v5017-ecu-programmer-pic-3
Step2:

2.1 It will pop up a Microsoft Visual C++2005 License Terms, click”Yes” to continue

kess-v2-firmware-v5017-ecu-programmer-pic-4

2.2 Select language as “U.S English”

kess-v2-firmware-v5017-ecu-programmer-pic-5

2.3 Click”Next” until “Finish” to complete Ksuite 2.22 wizard.

kess-v2-firmware-v5017-ecu-programmer-pic-6
2.4 Choose “English”
kess-v2-firmware-v5017-ecu-programmer-pic-7
Step3:

3.1 Back to Ksuite 2.23(E:) and open “Ksuite 2.23” folder, right click the “K-Suite” shortcut on desktop to choose”K-Suite Properties”

kess-v2-firmware-v5017-ecu-programmer-pic-8
3.2 Delete all files of “Ksuite”folder

kess-v2-firmware-v5017-ecu-programmer-pic-9

3.3 Then copy all files in “Ksuite 2.23″folder to “Ksuite” folder

Step4:

4.1 Now it will pop up a Found New Hardware Wizard, click”Next” then “Finish”

kess-v2-firmware-v5017-ecu-programmer-pic-10

4.2 After that the new usb Device exist(you can right click”my computer”—“Manage”—“Device Manage”

kess-v2-firmware-v5017-ecu-programmer-pic-11
4.3 Open K-suite shortcut and now it’s Ksuite 2.23 software

kess-v2-firmware-v5017-ecu-programmer-pic-12
4.4 Click “info” button and check the firmware is V5.017, now the installation is complete, you can use this new Kess V2 FW 5.017 ECU programmer
kess-v2-firmware-v5017-ecu-programmer-pic-13
KESS V2 Firmware V5.017 ECU list: http://www.carobd.de/wholesale/kess-v2-firmware-v5017-ecu-programmer.html

KESS V2 Firmware V5.017&VW Golf

kess-v2-firmware-v5017-ecu-programmer-pic-14

KESS V2 Firmware V5.017&BMW 3 Series

kess-v2-firmware-v5017-ecu-programmer-pic-15

 

More information, you can see on website: www.carobd.de