Tag Archive | Auto ECU Programmer

Clone Orange 5 Review: Works Perfect as an Original

Clone OEM Orange 5 programmer reviews:

Working good/bad? full chip covering or only partial???

 

Here is Orange 5 and the copy feedback from users.

 

I have it for a long time and for now everything is working properly.
One of the few clones that works well and works as an original.
Some adapters are not supplied and must be purchased separately

 

So far its reading and writing (with verify) all eeproms i try. Good tool so far.

 

I like PIN checking function (test insertions) very much .It saved my job a lot of time.
In combination with my UPA -S, Carprog, and TL866 programmer a lot of job can be done successfully .

 

Great programmer. All that is stated works. If the speed of exchange is not important, you can do a lot. Many good calculators

clone-orange-5-review-works-perfect-as-an-original-1

I have it 5.7 too and work perfect iven on win 10 x64..cas4-cas4+ and many more done no problem.. I also want to buy orange5

 

I buy Orange5 china clone. Work great. Now i check in hc05b8, hc11e9, and eeproms. All read and write very fast.

 

It’s almost the same as the price on the Orange website. Besides – on the webpage is written OEM.
Clone but includes – Immo HPX 9V0
confirmed that oem orange 5 comes with immo hpx 9.0 and adapter set

 

On Hc908az60 secured it work’s good.
I have 4 secured mcu, and they work ok.
I have tried 68hc11, a lot of eeproms, and it work’s just perfect.

 

have clone and work perfect. I pay 230usd
2j74y ok
35080 ok
Tms immo opel ok
Hc05 immo old vw ok

 

I have Orange 5 clone and everything works perfect for now.
I tested with 1J35D,4J74Y,1D69J,0D69J,0F82B,3K91D,TMS370c702

 

It is Clone but I confirmed that oem orange 5 comes with Immo HPX 9V0 and adapter set
The original Orange5 with adapter + same software around thousand dollors
Right got this in today. Software is very easy to install.

all functions open 1 – 10 exept car radio get error
tested reading usual eeproms all good
tested tms370 with adapter board did not read so maybe bad adapter board

tested immo login code from dump ,tms vw works

will test as i go

but there is one thing you should noticed
Well the original does not work with PSA so I don’t think the clone will

 

I read today 1d69j adapter success

 

this is a clone by the look of things and from downloading their software they have immo software and NEC software but only a couple from the radio software.

Here is all the immo images from their software if anyone wants them;
https://mega.nz/#!eoNQQaRA!u1r5kYYjtl2VXDuh8W5Fh39m_1J6IsW7C-cZHssurgw

 

 

TIP: Orange 5 Original vs Clone:

Do not get confused by Orange pricing. Orange charge separately for the device, the immo software, the airbag software and the radio software, plus a few specials.
All this comes with the clone.
To compare the two, you must add up all the costs from Orange. There is a very large saving if you buy the clone. But you cannot update it and you have no support from Scorpio. It will suit some people for sure. The adapters are poor quality, and for many the hardware does not work. No doubt as time goes by will will see huge threads about how to fix them. The company who makes it does not have a good reputation for quality or support.

I do not regret buying original Orange5 and Tango key programmer. But when I did there were no clones available as an alternative.

As for the Tango clone, it’s PCB and components are nothing like the original, and of a very poor quality. I have not seen inside an Orange5 clone yet.

[Value Bundles]2017 V2.23 Kess V2 Firmware V5.017 Online Version Plus V2.23 KTAG Firmware V7.020

Online Version Kess V2 Firmware V5.017 support online service, can work with interent, no tokens need, newly add 140+ protocols.Ktag SW V2.23 Firmware 7.020 Master Version ECU Programmer newly add 100+ ECU type models. Available Protocols for K-TAG: BDM MOTOROLA MPC5xx. Operation convenient, automatically recognize ECU model, high stability. What’s more, this package offer saves you money than buying them alone.

kess-v2-firmware-v5017-plus-v223-ktag-firmware-v7020_2017080172062833

This package including: Kess V2 V5.017 Online Version and V2.23 KTAG Firmware V7.020

Kess V2 V5.017 Highlight:

1. Multi-language support: English, German, Spanish, Italian, Portuguese, French.
2. Newest software: Ksuite V2.23
    KESS V2 V5.017 is with encrypted USB dongle, program safer and more stable!
    KESS V5.017 software is very easy to install, just click, Next Step, then it will work fine!
3. Latest and Best Firmware V5.017:
    KESS V2 V5.017 supports more 140 types of vehicles and protocols than KESS V2 V4.036
    KESS V2 V5.017 supports all protocols such as EDC17/k-line/DSG/DQ200 DQ250 DQ500 Gearbox/ST10 ….,No gray protocols anymore!
4. Online Version Kess V2 V5.017 is able to connect internet!!! Support online service!!!
5. 100% No Tokens Need for all vehicles, no tokens reset button, you can use Kess V5.017 for lifetime
6. Kess V2 Ksuite V2.23 Firmware V5.017 cover all major brands and protocols including Line, KAN, EDC17 and MED17 and for Ford J1850.
   KESS V2 V5.017 can support cars/trucks/tractors/bikes! KESS V2 supports vehicles accroding to engine. So V5.017 KESS V2 can support new vehicles!
7. Works on Win XP / Win7 32bit, Win 8, etc.
8. Kess V2 V5.017 with a very affordable price, can read and write ECU via OBD2 port directly, no need to disassemble ECU from the car, easy to use.
Ktag SW V2.23 FW V7.020 Highlights:
1. Latest Software: Ksuite V2.23
2. 2017 Latest Hardware: Firmware V7.020
Add New File type (FENDT/JCB/VALTRA TRACTOR BOSCH EDC17CV41 SISU ENGINE CAN
      Newly Add BMW Gasoline F Chassis and Mercedes W222
      Many encrypted new car models works: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU,Toyota 76F
      100+  ECU Types added
KTAG Firmware V7.020
3. Multi-Language Support: English, Italian, Deutsch, French, Portuguese, Spanish(If you need other languages, please feel free to contact us)
4. Support BDM Function Well, no checksum error, available Protocols BDM MOTOROLA MPC5xx
5. Support both Car, Motorcyle and Truck ECU Programming
6. No tokens need any more
8. Update: By CD or Download link only. (I can give you a link to download newest version of ktag software)
9. If you have ever bought these ktag ecu programmer sold on our website: HKSE80(SE80-C), SE80-BSE80-CSE80-E
you are offered to buy Latest Ktag firmware 7.020 main unit alone, it can work with the accessories of above k-tag programmer together
www.carobd.de offers only 325 EUR with Free Shipping!!!

Value Bundles Kess V5.017+Ktag V7.020 Unlimited Tokens ECU Programmer with Free ECM TITANIUM V1.61 Software

CarOBD.de offer you Value Bundles Kess V5.017+Ktag V7.020+ECM TITANIUM V1.61 Software, Kess V5.017 is perfect for OBD use, while Ktag V7.020 is perfect for Jtag, BDM and all the Boot application (tricore and ST10). This bundles is best match for ECU Programming, of course, help you save much money.

www.carobd.de offers you only 345 EUR, enjoy shopping!!!

kess-v5.017-ktag-v7.020-1

2017 Latest V2.23 KTAG ECU Programming Tool Firmware V7.020 KTAG Master Version with Unlimited Token

Ktag SW V2.23 Firmware 7.020 Master Version ECU Programmer newly add 100+ ECU type models. Available Protocols for K-TAG: BDM MOTOROLA MPC5xx. Operation convenient, automatically recognize ECU model, high stability.

ktag-frimware-v7020-ecu-programmer-with-renew-button

Ktag SW V2.23 FW V7.020 Highlights:
1. Latest Software: Ksuite V2.23

2. 2017 Latest Hardware: Firmware V7.020
Add New File type (FENDT/JCB/VALTRA TRACTOR BOSCH EDC17CV41 SISU ENGINE CAN
Newly Add BMW Gasoline F Chassis and Mercedes W222
Many encrypted new car models works: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU,Toyota 76F
100+ ECU Types added
KTAG Firmware V7.020
3. Multi-Language Support: English, Italian, Deutsch, French, Portuguese, Spanish(If you need other languages, please feel free to contact us)

4. Support BDM Function Well, no checksum error, available Protocols BDM MOTOROLA MPC5xx

5. Support both Car, Motorcyle and Truck ECU Programming

6. No tokens need any more

8. Update: By CD or Download link only. (I can give you a link to download newest version of ktag software)

9. If you have ever bought these ktag ecu programmer sold on our website: HKSE80(SE80-C), SE80-B, SE80-C, SE80-E
you are offered to buy Latest Ktag firmware 7.020 main unit alone, it can work with the accessories of above k-tag programmer together

Tips on using Ktag Firmware V7.020
1. Please Only Use Our Software
2. Operating System: Better to Use Win XP
3. Please Disconnect Internet While Using KTAG, Otherwise It Will Get Damaged
4. The only difference bettween item no. SE135-B and item no. SE135 is the outlook. They share the same functions and workable ECU tyeps.

www.carobd.de offers you only 179 EUR with free shipping

2017 Newest V2.23 KESS V2 Firmware V5.017 ECU Programming Installation on WinXP & ECU List

The following is the V2.23 KESS V2 installation guide and new KESS 5.017 ECU list by Ksuite 2.23 screenshots for you.

Note: KESS V2 Firmware V5.017 has token reset button so token unlimitied.

How to install V2.23 KESS V2 Firmware V5.017 on windows XP?
Before installation, please remember it can not connect the internet!

Step1:

1.1 Open Ksuite 2.23(E:) and run “Ksuite-222-v2″exe
kess-v2-firmware-v5017-ecu-programmer-pic-1
kess-v2-firmware-v5017-ecu-programmer-pic-2

1.2 When finish the setup, click”Next”, “Next” then “install”

kess-v2-firmware-v5017-ecu-programmer-pic-3
Step2:

2.1 It will pop up a Microsoft Visual C++2005 License Terms, click”Yes” to continue

kess-v2-firmware-v5017-ecu-programmer-pic-4

2.2 Select language as “U.S English”

kess-v2-firmware-v5017-ecu-programmer-pic-5

2.3 Click”Next” until “Finish” to complete Ksuite 2.22 wizard.

kess-v2-firmware-v5017-ecu-programmer-pic-6
2.4 Choose “English”
kess-v2-firmware-v5017-ecu-programmer-pic-7
Step3:

3.1 Back to Ksuite 2.23(E:) and open “Ksuite 2.23” folder, right click the “K-Suite” shortcut on desktop to choose”K-Suite Properties”

kess-v2-firmware-v5017-ecu-programmer-pic-8
3.2 Delete all files of “Ksuite”folder

kess-v2-firmware-v5017-ecu-programmer-pic-9

3.3 Then copy all files in “Ksuite 2.23″folder to “Ksuite” folder

Step4:

4.1 Now it will pop up a Found New Hardware Wizard, click”Next” then “Finish”

kess-v2-firmware-v5017-ecu-programmer-pic-10

4.2 After that the new usb Device exist(you can right click”my computer”—“Manage”—“Device Manage”

kess-v2-firmware-v5017-ecu-programmer-pic-11
4.3 Open K-suite shortcut and now it’s Ksuite 2.23 software

kess-v2-firmware-v5017-ecu-programmer-pic-12
4.4 Click “info” button and check the firmware is V5.017, now the installation is complete, you can use this new Kess V2 FW 5.017 ECU programmer
kess-v2-firmware-v5017-ecu-programmer-pic-13
KESS V2 Firmware V5.017 ECU list: http://www.carobd.de/wholesale/kess-v2-firmware-v5017-ecu-programmer.html

KESS V2 Firmware V5.017&VW Golf

kess-v2-firmware-v5017-ecu-programmer-pic-14

KESS V2 Firmware V5.017&BMW 3 Series

kess-v2-firmware-v5017-ecu-programmer-pic-15

 

More information, you can see on website: www.carobd.de

2017 Newest V2.23 KESS V2 Firmware V5.017 Fully Activated for Car Bike Truck Tractor ECU Programming No Tokens Limitation

KESS V2 V5.017 Introduction:
Kess V2 V5.017 can read and write ECU via OBD2 port directly, no need to disassemble the ECU from the car, easy to use.
Covering all major brands and protocols including Line, KAN, EDC17 and MED17 and for Ford J1850.
Kess V2 is everything you work as a successful tuner at a very affordable price.

kess-v2-firmware-v5017-ecu-programmer_2017071010062072

Kess V5.017 Highlights:
1. Language: English, German, Spanish, Italian, Portuguese, French.

2. Latest Firmware Version: V5.017, Latest Software version: Ksuite V2.23

3. Support Vehicles: fully activated to support car / truck / tractor / bike models:
Fully open to all protocols such as EDC17/k-line / DSG / DQ200 DQ250 DQ500 Gearbox / ST10 …., no gray protocols anymore!
Add more than 140 ECU types and protocols than Kess V4.036

4. Tokens: 100% no token limitation for all vehicles! So V5.017 is used for lifetime!

5. OS System: Works on Win XP / Win7 32bit, Win8, etc.

6. Easy to use:
Software is very easy to install, just click: Next Step, then it works fine!
Read and write ECU via OBD2 directly, no need to disassemble the ECU from the car

www.carobd.de offers you only 185 EUR with free shipping.

OEM Orange 5 V1.34 Professional Programming Device all inform here

OEM Orange 5 V1.34 Professional Programming Device is verified working fine and newly release at obdtool.co.uk. Following parts are about all details on OEM Orange 5 V1.34 in the following aspects including: function, package list, language, OS, supported software, software license, technical info and features.

Orange 5 Functions:

Orange 5 is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macro language for writing down protocols, which gives fast and easy capability to add new types of micro schemes, precisely meeting manufacturers’ requirements to read/write algorithms.

Orange 5 package list:

Orange-5 programmer 1

Power adapter 1

USBcable 1

Incircuit wire 10

SOIC8/DIP8 Expert adapter 1

SOIC8/DIP8 adapter 1

SOIC8_14_93Cxx adapter 1

SSOP8/DIP8 1

Lead with clips SOIC8 & DIP8 1

Adapter 05L28/05B 1

Adapter 908AS60/AZ60 QFP64 1

Adapter 68HC(7)05P3/E6 1

Adapter 05B/X_705B/X QFP64 V2 1

Adapter 11PA8/11E9 QFP64 1

Adapter 68HC05H12 1

Adapter 68HC11EA9 1

Adapter 908AS60 1

Adapter 9S12Dxx 1

Adapter 912Dxx 1

Adapter 9S12X 1

Adapter 912B32 QFP80 1

Adapter 68HC11F1 1

Adapter 68HC11L6 1

Adapter 68HC11KA4 1

Lead 11E9(20) with power 1

Lead for EWS3 mask 0D46J 1

Adapter TMS374C003A 1

Adapter MSP430F 1

Adapter 68HC11KA4 PLCC68 1

Adapter 908JL 1

Adapter PCF7941 1

Adapter 9S12XE 1

oem-orange5-programmer-blog-1
OEM Orange 5 language available:

Available with only English and Russian

orange5-programmer-blog-2

Orange 5 OS:

Windows XP, Win7 and Win8

Additional Supported Software:

Immo HPX 9V0

NEC V850ES/SJ3 V850ES/SG3 UART

NEC V850E2 NEW

Software Licenses:

MTRK (Included in Orange-5 base)

TMS (Included in Orange-5 base)

M08V NEW

Immo HPX 9V0

NEC V850ES/SJ3 V850ES/SG3 UART

NEC V850E2 NEW

OEM Orange 5 Technical Info:

* USB power supply (USB2.0/3.0)

* Universal easy to plug panel ZIF16 for EEPROM

* Control of contacts in the sockets

* Two expansions compatible with Orange4 and Omega MTRK

* Protection against overcurrent

* Overload voltage protection

* Two types of power supply: Standart (USB) and enhanced (USB + external power supply)

* Three 3 adjustable voltage and current control: Voltage of power supply ( 2.0…5.0V ), programming voltage (2.0…21.0V), additional static 10V for microcontrollers

* High-speed bidirectional pin drivers with adjustable voltage (2.0…5.0V)

* Wave cycle generator with frequency ( up to 24 Mhz) and out voltage(2.0…5.0V) adjustment

* Capability of functional emulation of class CDC USB devices

* Built-in 32-bit virtual machine

* Supported interface: I2C, SPI, MicroWire, JTAG, UART, BDM, ISO7816, K-LINE (via adapter), CAN (via adapter)

* Programmer is encolsed in a functional box. Supported working under Windows XP/7 32bit. [*Win8.1]

– Installation and Work with Orange-5 under Windwos 7 and Windows 8.1

CnCterm – Terminal program for work with COM ports.

Orange 5 Programmer Feature:

Supports any COM ports, incuding virtual ones from 1 to 20

Works with text (ASCII) and HEX mode

Creating a list of commands that allows editing and fast sending

Fine-tuning the exchange rate

Saving files including command and port settings.

Saving incoming data in binary files

File transfer via serial port.

Delay settings for bytes and blocks

“Echo” mode

Delay settings between incoming data

Managment of DTR, RTS chains, visualising DSR, CTS, CD, RI

Program doesn’t need to be installed

Support Orange5 programmer in emulation mode.