Emgrand 9s12 mileage correction using CG100 PROG III

To have Emgrand 9s12 mileage correction, I use CG100 PROG III. The old value is 30097KM, and the new value is 130193KM.

Here we go.

Attach pictures:

Connect CG100 PROG III main unit to BDM+4 adapter and then to the dashboard of Emgrand 9s12.

emgrand-9s12-mileage-correction-using-cg100-prog-iii-pic-1

emgrand-9s12-mileage-correction-using-cg100-prog-iii-pic-2

Backup the data

emgrand-9s12-mileage-correction-using-cg100-prog-iii-pic-3

Old value

emgrand-9s12-mileage-correction-using-cg100-prog-iii-pic-5

emgrand-9s12-mileage-correction-using-cg100-prog-iii-pic-6

New value

emgrand-9s12-mileage-correction-using-cg100-prog-iii-pic-7

This is just a general procedure on Emgrand 9s12 mileage correction using CG100 PROG III.

Have one CG100 PROG III, you may understand it more clearly.

How does SKP1000 program 2015 Buick Excelle remote key?

This post is on how to use SKP1000 tablet key pro to program 2015 Buick Excelle remote key.

Buick Excelle after 2013 comes with 70 big capacity chip which needs security code to program key.

The way to get security code is on the frame which is as the same as new Lacrosse and new Regal.

Step by step procedure:

Please be informed: the pictures comes from the Chinese version Lonsdor CI600 plus, and the words on the pictures are Chinese. Acutally the SKP1000 engineer ensure SKP1000 can perform the same as CI600, and the instructions on the screen are translated as the title.

Tap “program key on Buick Excelle after 2013”

how-does-skp1000-program-2015-buick-excelle-remote-key-pic-1

Tap ” Immobilizer”

how-does-skp1000-program-2015-buick-excelle-remote-key-pic-2

There are 3 options : delete key (to disable the lost key), add key and program remote controller

how-does-skp1000-program-2015-buick-excelle-remote-key-pic-3

Tap “add key”, the original car has 2 working keys

how-does-skp1000-program-2015-buick-excelle-remote-key-pic-4

Turn off ignition for 5 seconds then turn on, press “Yes” to continue.

how-does-skp1000-program-2015-buick-excelle-remote-key-pic-5

The security code is: 8352

how-does-skp1000-program-2015-buick-excelle-remote-key-pic-6

Indentifying the security code, 5 minutes left.

how-does-skp1000-program-2015-buick-excelle-remote-key-pic-7

Configuring system, please wait 10 minutes.

how-does-skp1000-program-2015-buick-excelle-remote-key-pic-8

Turn off ignition, press “Yes” to continue.

how-does-skp1000-program-2015-buick-excelle-remote-key-pic-9

Turn on ignition

how-does-skp1000-program-2015-buick-excelle-remote-key-pic-10

Please pull off the key, press “Yes” to continue.

how-does-skp1000-program-2015-buick-excelle-remote-key-pic-11

Configuring system, please wait 45 seconds.

how-does-skp1000-program-2015-buick-excelle-remote-key-pic-12

Add key on 2015 Buick Excelle successfully with SKP1000 tablet key pro.

how-does-skp1000-program-2015-buick-excelle-remote-key-pic-13

After the chip program successfully, back to tap “program remote controller”, it also needs the security code and the procedure is as the same as to program the chip.

V4.6.1 Xhorse VVDI PROG Programmer-bugs fix & add types/models

Download V4.6.1 VVDI PROG with bugs fix & add types/models
https://mega.nz/#!jxBFTCwb!jsFwimypcOIkrKhEheg8H3xmYutUspvtAxtK37exgy4

password:123456

this .zip file includes:

If you bought one Original Xhorse VVDI PROG Programmer from

www.carobd.de, now go to update by yourself and add below types / models. Feedback if any question.
v4.6.1 VVDI PROG update content (2017-08-30)

v4.6.1 (2017-08-30)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.1version in Doc folder
* Fix MC9S12XS/MC9S12XHY series PFLASH write error problem
* Fix SRS-VW52-V1 diagram
+ Add AT24C01(CLIP),AT24C02(CLIP), AT24C04(CLIP), AT24C08(CLIP), AT24C16(CLIP), AT24C32(CLIP),
AT24C64(CLIP), AT24C128(CLIP), AT24C256(CLIP),
AT24C512(CLIP), AT24C1024(CLIP), AT25010(CLIP), AT25020(CLIP), AT25040(CLIP), AT25080(CLIP),
AT25160(CLIP), AT25320(CLIP), AT25640(CLIP), AT25128(CLIP),
AT25256(CLIP), AT25512(CLIP), AT93C06[A](CLIP), AT93C46[A](CLIP), AT93C56[A](CLIP), AT93C57[A](CLIP),
AT93C66[A](CLIP), AT93C76[A](CLIP),
AT93C86[A](CLIP) options in <1-EEPROM&FLASH>-><ATMEL(CLIP)> (Need EEPROM CLIP ADAPTER)
+ Add CAT24C/W01(CLIP), CAT24C/W02(CLIP), CAT24C/W04(CLIP), CAT24C/W08(CLIP), CAT24C/W16(CLIP),
 CAT24C/W32(CLIP), CAT24C/W64(CLIP), CAT25C128(CLIP),
CAT25C256(CLIP), CAT93C46[A](CLIP), CAT93C56[A](CLIP), CAT93C57[A](CLIP), CAT93C66[A](CLIP),
 CAT93C76[A](CLIP), CAT93C86[A](CLIP) options in
<1-EEPROM&FLASH>-><CATALYST(CLIP)> (Need EEPROM CLIP ADAPTER)
+ Add XL[S]24C01(CLIP), XL[S]24C02(CLIP), XL[S]24C04(CLIP), XL[S]24C08(CLIP), XL[S]24C16(CLIP),
XL[S]93C/LC06(CLIP), XL[S]93C/LC46(CLIP), XL[S]93C/LC56(CLIP),
XL[S]93C/LC66(CLIP) options in <1-EEPROM&FLASH>-><EXEL(CLIP)> (Need EEPROM CLIP ADAPTER)
+ Add FM24C02(CLIP), FM24C03(CLIP), FM24C04(CLIP), FM24C08(CLIP), FM24C09(CLIP), FM24C16(CLIP),
FM24C17(CLIP), FM93CS06(CLIP), FM93CS46(CLIP), FM93CS56(CLIP),
FM93CS66(CLIP), NM24C02(CLIP), NM24C03(CLIP), NM24C04(CLIP), NM24C05(CLIP), NM24C08(CLIP),
NM24C09(CLIP), NM24C16(CLIP), NM24C17(CLIP), NM24U17(CLIP),
NM24C32(CLIP), NM24C65(CLIP), NM93C06(CLIP), NM93C46(CLIP), NM93C56(CLIP), NM93C66(CLIP),
NM93C86(CLIP), NM93CS06(CLIP), NM93CS46(CLIP), NM93CS56(CLIP),
NM93CS66(CLIP) options in <1-EEPROM&FLASH>-><FAIRCHILD(CLIP)> (Need EEPROM CLIP ADAPTER)
+ Add 24AA02(CLIP), 24AA04(CLIP), 24AA08(CLIP), 24AA16(CLIP), 24AA164(CLIP), 24AA32(CLIP), 24AA128(CLIP),
24AA256(CLIP), 24C02(CLIP), 24C04(CLIP), 24C32(CLIP),
24LC02(CLIP), 24LC04(CLIP), 24LC08(CLIP), 24LC16(CLIP), 24LC164(CLIP), 24LC32(CLIP), 24LC64(CLIP),
24LC65(CLIP), 24LC128(CLIP), 24LC256(CLIP),
93C/LC/AA46A(CLIP), 93C/LC/AA56A(CLIP), 93C/LC/AA66A(CLIP), 93C/LC/AA76A(CLIP),
93C/LC/AA86A(CLIP), 93C/LC/AA46B(CLIP), 93C/LC/AA56B(CLIP), 93C/LC/AA66B(CLIP),
93C/LC/AA76B(CLIP), 93C/LC/AA86B(CLIP), 93C/LC/AA46C(CLIP), 93C/LC/AA56C(CLIP),
93C/LC/AA66C(CLIP), 93C/LC/AA76C(CLIP), 93C/LC/AA86C(CLIP) options in
<1-EEPROM&FLASH>-><MICROCHIP(CLIP)> (Need EEPROM CLIP ADAPTER)
+ Add M24C01(CLIP), M24C02(CLIP), M24C04(CLIP), M24C08(CLIP), M24C16(CLIP), M24C32(CLIP),
M24C64(CLIP), M24C128(CLIP), M24C256(CLIP), M24C512(CLIP),M93C06(CLIP),
M93C46(CLIP), M93C56(CLIP), M93C66(CLIP), M93C76(CLIP), M93C86(CLIP), M95010(CLIP),
M95020(CLIP), M95040(CLIP), M95080(CLIP), M95160(CLIP), M95320(CLIP), M95640(CLIP),
M95128(CLIP), M95256(CLIP), M95512(CLIP), ST24C01(CLIP), ST24C02(CLIP), ST24C04(CLIP),
ST24C08(CLIP), ST24C16(CLIP), ST24E16(CLIP), ST24E32(CLIP), ST24W02(CLIP),
ST24W04(CLIP), ST24W08(CLIP), ST24W16(CLIP), ST25C01(CLIP), ST25C02(CLIP), ST25C04(CLIP),
ST25C08(CLIP), ST25C16(CLIP), ST25E16(CLIP), ST25E32(CLIP), ST93CS56(CLIP),
ST93CS57(CLIP), ST93CS66(CLIP), ST93CS67(CLIP), ST93CS47(CLIP), ST93CS46(CLIP)
options in <1-EEPROM&FLASH>-><ST(CLIP)> (Need EEPROM CLIP ADAPTER)
+ Add X24C01(CLIP), X5043(CLIP), X5045(CLIP) options in <1-EEPROM&FLASH>->
<ST(CLIP)>(Need EEPROM CLIP ADAPTER)
+ Add ME7.4.5-FLASH-ST10F275, ME7.4.5-EEPROM-95320 options in <3-ECU>-><BOSCH>
+ Add BCM2(D70F3380) option in <4-IMMOBILIZER>-><AUDI>
+ Add EWS3-KLINE(0D46J) option in <4-IMMOBILIZER>-><BMW> (Need EWS3 ADAPTER)
+ Add BCM-XEP100(2009–) option in <4-IMMOBILIZER>-><LANDROVER>
+ Add LAGUNA-UCT(2006) option in <4-IMMOBILIZER>-><RENAULT>
+ Add BCM2(D70F3380) option in <4-IMMOBILIZER>-><VOLKSWAGEN>
+ Add BJ40-DASHBORAD, E150-DASHBORAD(2014), EX200-BCM(2016) options in
<5-DASHBORAD>-><BAICMOTOR>
+ Add EQ-DASHBOARD(2017) option in <5-DASHBORAD>-><CHERY>
+ Add AUTOPLEAD-DASHBOARD(2017) option in <5-DASHBORAD>-><DAYUN>
+ Add IEV-DASHBOARD(2017) option in <5-DASHBORAD>-><JAC>
+ Add BEETLE-DASHBOARD(2005), BEETLE-DASHBOARD(2010) options in <5-DASHBORAD>-><VOLKSWAGEN>
+ Add REGAL-SRS(2014) option in <7-ARIBAG>-><BUICK>
+ Add GOLF7-SRS option in <7-ARIBAG>-><VOLKSWAGEN>
+ Add A6L-C7-EPB-MODULE option in <8-OTHER>-><AUDI>
+ Add 300C-PDC-MODULE(2007–) option in <8-OTHER>-><CHRYSLER>
+ Add MAGOTAN-LEW-MODULE, POLO-J393-EEPROM, TIGUAN-EPB-MODULE options in <8-OTHER>-><VOLKSWAGEN>
Notes: about eeprom clip adapter(NO need soldering) or EWS 3 adapter,please contact dealer for help.
v4-6-1-xhorse-vvdi-prog-programmer-bugs-fix-add-typesmodels-pic-2
v4-6-1-xhorse-vvdi-prog-programmer-bugs-fix-add-typesmodels-pic-3
v4-6-1-xhorse-vvdi-prog-programmer-bugs-fix-add-typesmodels-pic-4

How to add VVDI2 BMW FEM/BDC Authorization?

V4.3.0 VVDI2 newly add BMW FEM/BDC system key learning, erase key; Add BMW FEM/BDC system reset KM; Add FEM/BDC system backup coding, restore coding.If you have VVDI2 Full or VVDI2 BMW,how can you get VVDI2 BMW FEM/BDC authorization?

There are two ways to get VVDI2 BMW FEM/BDC function:

1.Purchase from us.This is what we will introduce in our blog.

2.Remote points exchange.If you have condor key cutting machine,6000 points.If without,8000 points.F

How to add VVDI2 BMW FEM/BDC Authorization?

If you have condor key cutting machine,please check VVDI2 BMW FEM/BDC Function Authorization Service For Condor Cutter Only

If do not have,please check:VVDI2 BMW FEM/BDC Function Authorization Service

After you purchase,please provide the following information:

VVDI2 Serial number,if you have some other Xhorse tool,please also provide us their serial number.

How to check VVDI2,VVDI PROG,VVDI MB Tool serial number?

Back of main unit,it shows the serial number,send them to us is OK.

How to check VVDI Key Tool serial number?

VVDI Key Tool back does not tag the serial number,you can check from the carton box.

Or if you can not find the carton box,please download VVDI Key Tool update tool software,connect VVDI Key Tool with computer,click device info,it will display serial number,format is :VK********.

When authorization is OK,we will send email to inform you.Then wait more than 30 minutes,update vvdi2 firmware.P;lase confirm you use newest VVDI2 software,update vvdi2 firmware.

How to use VVDI2 V4.3.0 BMW FEM/BDC Key Programming Function?

Xhorse VVDI2 key programmer V4.3.1 software released BMW FEM/BDC system key programming function.

VVDI2 latest software V4.3.1 update
************************************************ ********************
*** 2017-08-18
*** Require firmware V4.3.0
************************************************ ********************
===== VAG V4.3.1 =====
1. Copy 48 function: Support Passat B6/CC with 48 transponder
2. Bugfix
===== BMW V4.3.1 =====
1. Improvement for BMW FEM/BDC key learn
2. Bugfix
===== Porsche V4.3.0 =====
1. Bugfix
===== PSA V4.3.0 =====
1. Bugfix
===== Transponder Programmer V4.3.0 =====
1. Bugfix
===== J2534 V4.3.0 =====
1. Bugfix
===== Online Upate Tool V4.3.0 =====
1. Bugfix
===== Quick Start V4.3.0 =====
1. Bugfix

Notes: for 4.3.0 software users just download 4.3.1 can use directly,no need update firmware again.https://mega.nz/#!SoYC1Q6a!hcskAhiMXQdGV1Bc-1I-tMTSRZubodozGkY_bUsKzUc 

FAQ:
Q: After activation the fem bdc it will work without tokens?
A: Yes.
VVDI2 – BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)

1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if ‘get key info’ the type not support, it will show:customer should use “BMW E-sys software” program FEM/BDC system.then programming FEM/BDC system with VVDI2 BMW
4.when operation on ‘programming FEM/BDC system’interface,please don’t close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use “BMW E-sys software” coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.


If your vvdi2 already bind to condor,then BMW FEM/BDC =510 EUR
without condor: BMW FEM/BDC = 680 EUR  Pls note:

1.Your vvdi2 must already has BMW OBD functions
2.After payment, pls give us serial number of VVDI2 and condor(if you have)

BMW FEM/BDC Authorization for VVDI2 (With Condor)

BMW FEM/BDC Authorization for VVDI2 (Without Condor)

Xhorse VVDI Prog Programmer Unbeatable Coverage list

Why should any Tuner, Locksmith, Specifically BMW + LandRover + Mercedes Benz specialist, Tango transponder programmer users should get Xhorse VVDI Prog programmer, full story below.
Ever since the good old Rosfar R-260 programmer development project was abandoned back in 2009 nothing compared to it’s reliability managed to complete the task, although many Chinese + European websites continued to promote Rosfar R-260 programmer as if it was still alive where the reality is that the Italian maker was long gone,
until VVDI Prog showed up last year, dear technicians we’ve demonstrated below VVDI Progunbelievable unbeatable Coverage list + Lifetime free updates, clearly it’s a must have 😉

BMW E SERIES ECU,s

MEVD17(N55)

MEVD1724(N20)

MEVD1726(N55)

MEVD1729(N20)

BMW F SERIES

MEVD172(N55)

MEVD1724(N20)

MEVD1725(N13)

MEVD1726(N55)

MEVD1728(N63/S63)

MEVD1729(N20)

MEVD172G(N55)

MEVD172P(N20)

MEVD172S(N55)

BOMBARDIER QUADROCYCLE(2011)

CHANGAN BENBEN MT20UED

DELPHI

ME20U2-XET256

ME20U2-XET512

MT20U2-MC912DT128P

MT20U2-2L33V

MT20UED

MT22-XEP768

MT60-XEP768

MT80(TC1766)

KIA ME17.9.11.1(TC1762)

MAGNETI MARELLI

IAW-6LP2.03

IAW-6LPA.01

RENAULT MODUS-XC164CS-32F

VOLKSWAGEN TriCore

EDC17_CP14(TC1796)

MED17.1(TC1766)

MED17.5(TC1766)

MED17.5.20(TC1766)

OTHER XP8000E-XET256

BOSCH ME7.9.7.1
VVDI Prog IMMOBILIZER

AUDI

BCM2 (D703379/F3381/3634)

A4L-BCM (1L15Y)

J518 (–2010) Masks (1L59W/3L40K)

J518 (2010–) Mask (0L01Y)

MERCEDES BENZ

All Electronic Ignition Switch EIS types expect W210 with 705/H05 2x MCU,s inside which can be Ignored

EIS/EZS-W203 (HC08)

EIS/EZS-W220 (HC08)

EIS/EZS-W639 (HC08)

EIS/EZS -W203 (HC12)

EIS/EZS-W209 (HC12)

EIS/EZS-W211 (HC12)

EIS/EZS-W219 (HC12)

EIS/EZS-W220 (HC12)

EIS/EZS-W230 (HC12)

EIS/EZS-W164 (ST12)

EIS/EZS-W169 (ST12)

EIS/EZS-W203 (ST12)

EIS/EZS-W209 (ST12)

EIS/EZS-W211 (ST12)

EIS/EZS-W215 (ST12)

EIS/EZS-W219 (ST12)

EIS/EZS-W220 (ST12)

EIS/EZS-W221 (ST12)

EIS/EZS-W230 (ST12)

EIS/EZS-W463 (ST12)

EIS/EZS-VANEO (ST12)

EIS/EZS-MAYBACH (ST12)

EIS/EZS- SPRINTER (2015–) (ST12)

BMW Late EWS4 + All CAS generations Exx & F01,F02,F10,F11 Series

EWS4.X All Masks

CAS2 Mask (2K79X/0L01Y)

CAS3 Mask (2K79X/0L01Y)

CAS3+ Mask (0L15Y/0M23S)

CAS4 Mask (1L15Y)

CAS4 Mask (5M48H/1N35H)

CHEVROLET NEW SAIL BCM (2013–)

STEC STEC IMMOBILIZER

CHRYSLER

300C Immo

DODGE-JOURNEY-WIN(2010)

FIAT IMMOBILIZER

FORD BCM-Masks 7S7T / 1L15Y

GM BCM3

GREATWALL

DELPHI-IMMOBILIZER

H2-BCM

INFINITI

BCM-XDT384 X Gate 9s12 Mcu

BCM-XEG384 X Gate 9s12 Mcu

LANDROVER

RANGE ROVER EWS(2004-08)

DISCOVER3-CEM

RANGE ROVER SPORT-CEM

LUXGEN BIG7-ICU(HC908GZ32)

JAGUAR SMARTKEY-0L01Y

NISSAN

BCM-XDT384

BCM-XEG384

OPEL

ASTRA DG128

ZAFIRA DG128

VECTRA(2004-08)

PORSCHE

BCM-1L15Y

BCM-2M25J

BCM-5M48H

BCM-1N35H Security protection bypass function tested

RENAULT

BCM-XDT384

BCM-XEG384

LAGUNA BCM (2010–)

SAICMOTOR

MG7 R

ROEWE750 R

VOLKSWAGEN

BCM-XEQ384

BCM2 NEC (D703379/F3381/3634)

ZHONGHUA H530-BCM-V1

FAW

BESTURN-B90-BCM

JIEFANG-J6-HCS300

JIEFANG-J6-BCM

BUICK

EXCELLE BCM (2013–)

EXCELLE GT BCM (2013–)

EXCELLE (2014)

JEEP GRAND-CHEROKEE-IMMO Mask (0L72A)

LEOPAARD CS10-IMMO

YEMA T70-IMMO

Immobillizer Related Modules

AUDI ESL-HC08GR16-V1

BENZ

FC-OPERATION-UNIT-W221

ISM-W221

KG-MODULE-W221 R Two Versions supported

LU-W221

REAR-SAM-W212

SAM-W221

BMW

DKG-MODULE(2008)

FRM-E-SERIES-XEQ384

FRM-F-SERIES-XET512

F-SERIES-SZL-MODULE

BUICK GL8-KG-MODULE

CHANGAN

RAETON-HVAC-MODULE(2013)

RAETON-KG-MODULE(2013)

CHEVROLET CRUZE-CD-PLAYER

DONGFENG FENGGUANG580-KG-MODULE

FORD FOCUS-BCM

GREATWALL

HVAC-MODULE(2015)

HAVAL-H9-4WD-MODULE

HYUNDAI IX35-ASSY-SMARTKEY-UNIT

JEEP TRUCK-LOCK-MODULE(2014–)

MAZDA RUIYI-KG-MODULE(2009)

RANGE ROVER RFA Marked O & X V1,V2,V3

VOLKSWAGEN

GOLF6-PDC-MODULE

MAGOTAN-EPB-MODULE(2013)

NEW-JETTA-PDB-MODULE

NEW-SANTANA-PDB-MODULE

PASSAT B6-PBCM

LANDROVER

ATCM

RFA-V1

RFA-V2

RENAULT

CLIO3-EPS-XC164CS-32F

CLIO3-EPS-ST10F269

SACHS CDC-XC164CS-16F

Xhorse VVDI Prog Programmer Review on BMW cars

Here is user working experience of original Xhorse VVDI Prog programmer on BMW cars. (Here talking about BMW only).

Tested by me: cas 2, cas 3, cas 3+, Cas4 5m48h, volvo cem v40
all ok.

Is a very good tool and for bmw cas4 .

I tested today D80 and a m35080v6, and they work perfect.

Mine erased D160 (BMW F01 dash) with no problem.

Tried to renew bmw e series 868 key. Vvdi programmer claimed operation success but in tango key is now recognized as transponder type A. locked

I did renew 2 keys! Both worked and now are programmed to cars!

Only thing you need to disconnect from PCB is battery while writing the renew file. (Remove the batteries)

Renew BMW series E 868 key – 100% OK z vvdi-prog v4.5.7

FRM3 works perfectly

More EDC17 under ECU section would be great!
Especially BMW EDC16 and EDC17 for ISN purposes.
BMW F series FEM module reading but for that i can only dream about…

BMW BMSX bike ECU would be great…

Renew pcf7946 and 29f family

Renew E series remote with pcf7942 / pcf7944 would be fine

Unlock and download the 9S12G128 secure without erasing it first would be nice .

erasing all 35080s and d80 with soic clip would be super nice too!

I read the CAS3+ MCU with VVDI Prog and that worked perfect.

BMW FRM3 series Exx – READ and WRITE – OK
BMW KEY series Exx – OK
BMW DashBoard 6WB 160DQWT – READ , ERASE , WRITE – OK
test vvdi prog v4.5.7

Clone Orange 5 Review: Works Perfect as an Original

Clone OEM Orange 5 programmer reviews:

Working good/bad? full chip covering or only partial???

 

Here is Orange 5 and the copy feedback from users.

 

I have it for a long time and for now everything is working properly.
One of the few clones that works well and works as an original.
Some adapters are not supplied and must be purchased separately

 

So far its reading and writing (with verify) all eeproms i try. Good tool so far.

 

I like PIN checking function (test insertions) very much .It saved my job a lot of time.
In combination with my UPA -S, Carprog, and TL866 programmer a lot of job can be done successfully .

 

Great programmer. All that is stated works. If the speed of exchange is not important, you can do a lot. Many good calculators

clone-orange-5-review-works-perfect-as-an-original-1

I have it 5.7 too and work perfect iven on win 10 x64..cas4-cas4+ and many more done no problem.. I also want to buy orange5

 

I buy Orange5 china clone. Work great. Now i check in hc05b8, hc11e9, and eeproms. All read and write very fast.

 

It’s almost the same as the price on the Orange website. Besides – on the webpage is written OEM.
Clone but includes – Immo HPX 9V0
confirmed that oem orange 5 comes with immo hpx 9.0 and adapter set

 

On Hc908az60 secured it work’s good.
I have 4 secured mcu, and they work ok.
I have tried 68hc11, a lot of eeproms, and it work’s just perfect.

 

have clone and work perfect. I pay 230usd
2j74y ok
35080 ok
Tms immo opel ok
Hc05 immo old vw ok

 

I have Orange 5 clone and everything works perfect for now.
I tested with 1J35D,4J74Y,1D69J,0D69J,0F82B,3K91D,TMS370c702

 

It is Clone but I confirmed that oem orange 5 comes with Immo HPX 9V0 and adapter set
The original Orange5 with adapter + same software around thousand dollors
Right got this in today. Software is very easy to install.

all functions open 1 – 10 exept car radio get error
tested reading usual eeproms all good
tested tms370 with adapter board did not read so maybe bad adapter board

tested immo login code from dump ,tms vw works

will test as i go

but there is one thing you should noticed
Well the original does not work with PSA so I don’t think the clone will

 

I read today 1d69j adapter success

 

this is a clone by the look of things and from downloading their software they have immo software and NEC software but only a couple from the radio software.

Here is all the immo images from their software if anyone wants them;
https://mega.nz/#!eoNQQaRA!u1r5kYYjtl2VXDuh8W5Fh39m_1J6IsW7C-cZHssurgw

 

 

TIP: Orange 5 Original vs Clone:

Do not get confused by Orange pricing. Orange charge separately for the device, the immo software, the airbag software and the radio software, plus a few specials.
All this comes with the clone.
To compare the two, you must add up all the costs from Orange. There is a very large saving if you buy the clone. But you cannot update it and you have no support from Scorpio. It will suit some people for sure. The adapters are poor quality, and for many the hardware does not work. No doubt as time goes by will will see huge threads about how to fix them. The company who makes it does not have a good reputation for quality or support.

I do not regret buying original Orange5 and Tango key programmer. But when I did there were no clones available as an alternative.

As for the Tango clone, it’s PCB and components are nothing like the original, and of a very poor quality. I have not seen inside an Orange5 clone yet.

How to Unlock & Program Toyota Land Cruiser VXR V8 Smart key

Guide to unlock and program smart key on a 2016 Toyota Land Cruiser VXR V8 5.7 4×4.

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-1

The solution was provided by a Chinese locksmith A Jie.

 

Problem:

A customer bought a Toyota Cruiser VXR V8 5.7 in Aug, 2016. When came back home he found one of keys did not working, could not start the vehicle. He came me for help.

 

Diagnose:

Check the key frequency and chip type with ND900 key copy machine. It showed key’s programmed, so the smart key is okay.

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-2

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-3

Analysis:

1. The smart key has been programmed but not been learned

2. 4S store gave you the wrong key (the key is not for this vehicle)

 

How to check:

Method 1:

Program/learn the smart key by using SKP1000 tablet car key programmer. Unfortunately, skp-1000 failed to learn key. So the smart key is not correct key for this vehicle.  You should get the smart key unlocked and programmed. Go and check method 2.

 

Method 2:

Step 1: Unlock Smart key

Unlock the smart key with Xhorse VVDI2 key programmer or ND900 Mini

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-4

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-5

Perform Blank Check,  key indicator will flash within 5 seconds if VVDI2 unlock success

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-6

Again use ND900 to check the unlocked smart key.

It shows not been programmed

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-7

Unlock smart key done.

 

Step 2: Add/Program smart key 

Connect SKP1000 key programmer with vehicle via OBD socket

Select Immobilizer function- >select Toyota->Smart key CANBUS-> Smart key system

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-8

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-9

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-10

Choose OBDII connector

Turn ignition ON

Press YES to continue

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-11

Press the Start button

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-12

Put the registered smart card into coil.

If hear a beep sound, take away the smart card

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-13

Select Add smart key

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-14

the working key is close to the emergency starting induction antenna

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-15

Change a new smart key and put it into the coil

Press YES to continue

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-16

the new smart key is close to the emergency starting induction antenna

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-17

Configuring…

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-18

Program/Add smart key success

how-to-unlock-program-toyota-land-cruiser-vxr-v8-smart-key-19

Test the new smart key.

Volvo Tech Tool 2.5.86 Win 7 download, install, activate

Volvo premium tech tool 2.5.86 software download:

http://www.carobd.de/wholesale/volvo-88890300-vocom-ptt-20455.html

 

This is the latest Volvo Tech Tool 2.5.86 crack… works perfect with Nexiq, Xtruck, DPA4+, DPA5, Vocom, 88890020, Noregon, for diagnostics via tech tool/ programming via dev2tool/ reprogramming via visfeed on old or new trucks (2017).

 

Volvo PTT 2.5.86 software update:

 

  1. Last official version Volvo Tech Tool 2.5.86 Development maximal authorized

* Full Techtool Activating (For all volvo brands !!!)

* Last ACPI+ update for standard and for development AND special DESIGNER user !!!

* You can Choose User ID like: A123456 or M555555 OR TECHTOL OR ANY OTHER..

*You can choose your logo or name to stay in tech tool

*NOT DLL PATCHED registration. Real registration for Tech tool

 

  1. Dev2tool (for programming parameters on older trucks)
  2. Developer tool Acpi+ Ultimate pro v3 (for programming parameters on newer trucks)

– Connection on real vehicle – NEW Verion

  1. IS editor Encriptor/ Decriptor
  2. Visfeed + Volvo xml editor + instruction
  3. Parameter description for all version (2 3 and 3 version ) -New Version

7.Volvo/ IS File Encryptor/Decryptor

  1. Dtc error info – New Verison –
  2. TT old electrical system converter tool
  3. VISFEED ENC/DEC TEA2 ULTIMATE version

 

 

Tech Tool 2.5.86 Windows 7 32/64bit install:

Windows 7 32/64 Ultimate or Professional or Enterprice With service pack 1.
DONT WORK With Home Edition

volvo-88890300-vocom-ptt-20455-1

volvo-88890300-vocom-ptt-20455-2

1/ open in admin setClientID.exe set ID:   190430

2/ TechToolInstaller_Dev.reg

3/ TT204-Prerequisites.cmd (client update ID:190430)

4/ TT204-MainInstallationPackages.cmd

5/ TT204-MainInstallationPackages2.cmd

6/ TT204-Patches.cmd

 

(don’t open tech tool)

 

 

open client update and make all update 2.04.87(is very long)

 

Copy and Replace

APCIPLUSDATA.DLL

C:\Program Files (x86)\Tech Tool\Tech Tool\Apciplus

 

BaldoLocal.Data.dll >>

C:\Program Files (x86)\Tech Tool\Tech Tool\BaldoLocal

 

VolvoIt.Waf.Login.Ui.dll >>

C:\Program Files (x86)\Tech Tool\Tech Tool\Login

 

BaldoLocal.sdf >>

C:\ProgramData\Tech Tool

copy and raplace apci+ update / in these path :

C:\ProgramData\Tech Tool\Waf\DtR

and

C:\ProgramData\Tech Tool\Waf\OtD

 

open tech tool

 

Tech Tool and Update Product Information

 

Disclaimer: premium tech tool software installation is time-consuming (usually needs one day) and it’s not easy for most of diy users. Usually, volvo tech tool for sale comes together with free installation service on many eshops, such as carobd.de and the like.

volvo-88890300-vocom-ptt-20455-3

volvo-88890300-vocom-ptt-20455-4

volvo-88890300-vocom-ptt-20455-5

volvo-88890300-vocom-ptt-20455-6

volvo-88890300-vocom-ptt-20455-7

Volvo Tech Tool 2.5.86 activation:

 

The latest version is Tech Tool 2.5.86.0 and the latest have new update technology
and it’s because of bad activation. new 2.06 not could work with old activators.

Usually KG doesn’t activate properly. Version 2.5.86 has RSS feeds that it calls to in order to initialize the application. If you’re not connected to the internet during this, it will fail and timeout causing that drop down to become blank, and also stopping use of PTT altogether.

 

How to fix for tech tool activation:

First, make sure to use a USERID that follows Volvo standard or you won’t be able to program parameters and will result in an error.
– you must use two alphanumeric characters followed by an even number of numbers. For example, AB1234.

Also, you must check the box “No central” if using the popular KG floating around or you will need to background sync. This is the reason your databases are coming up blank and I’m guessing it’s running slow when this occurs. The temp fix is to connect to the internet, then open Tech Tool. Problem solved for a week then it will occur again unless you re-run the KG, erase DB and re-activate using “No central store” checkbox and correct user ID fingerprint.

 

 

* The last important for newbies: to buy Premium Tech Tool PTT 2.5.86 with FREE installation & activation service. Now, many Chinese vendors sell Premium Tech Tool crack and offer free service like this as far as i know.  carobd.de  is one of them.

 

 

 

 

 

Premium tech tool truck list:

 

Volvo Trucks (Older electrical system, Vehicle electrical system \`98);
Volvo Trucks (VERSION2, VERSION3 – PARAMETER PROGRAMMING);
Volvo Trucks (VERSION4 – FH4/FM4 – PARAMETER PROGRAMMING);
Volvo Buses (Conventional, Multiplexed, Multiplexed v2, Multiplexed v3);
Volvo Construction Equipment;
Volvo Penta (VERSION2, VERSION3);
Volvo OEM Component Customer (VERSION2, VERSION3);
Mack Trucks (V-MAC I/II/III, ITC, IV, IV+ – PARAMETER PROGRAMMING);
Renault Trucks (VERSION2, VERSION3, VERSION4 – PARAMETER PROGRAMMING);
UD Trucks (VERSION2, VERSION3).PARAMETER PROGRAMMING);

 

Volvo tech tool full kit:

 

  1. Dev2tool (for programming parameters version 2 – older trucks)
    2. Developer tool Plus(Acpi+) (for programming parameters version 3 and 4 – newer trucks)
    3. Visfeed + Xml Editor
    4. Volvo/ IS File Encryptor/Decryptor
    5. Volvo Traing Files (Flash, PDF,Video) 3gb