Autel IM608 Pro or Autel IM608, what is the difference?

Autel IM608 Pro or Autel IM608, what is the difference?

Autel MaxiIM IM608 Pro with IMMO XP400 Pro is the most advanced and unique all in one key programming and diagnostic tool that combines advanced key programming, all systems diagnostics, and advanced services in one Android based 10.1-inch touchscreen tablet. It is equipped with XP400 PRO key programmer and MaxiFlash ECU programmer to provide complete coverage of IMMO and programming functions. IM608 PRO provides you with all special functions to quickly diagnose all modules for the majority of the makes and models on the market. It is the unprecedented key programming and diagnostic tool that you ever wanted.

Autel MaxiIM IM608 with Enhanced XP400 Key Programmer is the most advanced and comprehensive all-in-one car key programming and diagnostic tool that integrates professional key programming, all system diagnostic, Bi-directional control and 31+ reset services. Equipped with XP400 Key Programmer and MaxiFlash J-2534 VCI to offer complete IMMO coverage and programming functions. Autel IM608 offers smart mode and expert mode to satisfy different need and improve working efficiency.

The only difference between IM608 and IM608 Pro is the programmer that comes with the tablet. The tablets themselves IM608 and IM608Pro have no difference in terms of hardware and software. All keep the same. As for the difference of XP400 and XP400Pro, the main difference is the hardware upgrade

But the good thing is you can buy XP400Pro and optional adaptors together with any Autel key programming tool like IM608 and IM508 to have the same features with IM608Pro&XP400Pro and optional adaptors.

XP400Pro programmer upgrade and improvement compare to XP400
Fixed the problem of connecting the XP400 to the vehicle ODB connector causing the burnout of the device.
Fixed the stabilityproblem of using APB102 IR key to read/write.
Upgrade the hardware of programmer, Chip read/write function is more stable and support moreEEPROM chips.
Fixed theproblem of EERPOM adaptor APB101 can’t read/write EEPROM chip and rename it as APA129.
Rename accessories APA104、APA105、APA106 as APA107、APA108、APA109.
APA108 and APA109 cable length is shorter than before, reducingthe signal interference.

XP400 Pro add support for following chips
(1) EEPROM–>>AMD–>>AM29FXXX series chip；
(2) EEPROM–>> FUJITSU–>> MB29FXXXseries chip；
(3) EEPROM–>> ST–>> M29FXXXseries chip；
(4) Engine control module–>> ST–>> M29FXXXseries chip；
(5) IMMO–>> BENZ–>> ESL_W209_W906(Motorola) read/write/erase function；
(6) IMMO–>> BMW–>>EWS3 module read/write function；
(7) REMOTE_RENEW(renew key)–>> NEC–>> V51 and V57 chip read/write/erase；(Support original dealer key learning with key dump mode.)

XP400 Pro adds support for following adaptor board
(1) APB113 PCF79XXadaptor；
(2) APB114 EWS3 adaptor；
(3) APB115 NEC Adapter；
(4) APB118 NEC ELV adaptor；
(5) APB119 TB28FXXXadaptor；
(6) APB120 TMS370adaptor；
(7) APB121 AM29FXXX Adaptor；
(8) APB122 AM29FXXX adaptor;
(9) APB123 AM29FXXX adaptor;
(10) APB126 M35080/D80 adaptor board；
(11) APB127 MC68HC0(7)05BXX adaptor；
(12) APB128 MC68HC05X32 adaptor；

X400pro supports 12 types of unlocking smart key
BMW E Chasis remote control
OE 315 remote refresh
OE 868 remote refresh
Aftermarket remote control refresh
BMW F Chasis remote control
315 remote refresh
433 remote refresh
868 remote refresh
Audi–semi smart key
PCB2_8T0959754_433_REMOTE
PCB2_8T0959754D_868_REMOTE
Audi–smart key
PCB3_4H0959754DA_433_SMARTKEY
PCB3_4H0959754DB_315_SMARTKEY
PCB3_4H0959754DD_868_SMARTKEY

Steps for OBDSTAR X300M adjust Mileage for Benz C Class W204

Aug12

Steps for OBDSTAR X300M adjust Mileage for Benz C Class W204

OBDSTAR X300M ist am gewidmet, die meisten professionellen X300 M nur für Entfernungsmesserjustage ist, der Beruf schafft, Haupteinheit System nimmt es ARM High-Speed-Chip zu halten läuft schnell, stabil und Anti-Jamming. Rüsten Sie über TF-Karte jederzeit .

Here we share a real testing sample.

Product: Obdstar X300M

Vehicle: Benz C Class W204

Connecting Method: Via OBD.

First of all, need to connect X300M with W204 model

Please Kindly Note: Customer need to plug in the filter befor Benz W204 adjust the meter.

PCMtuner V1.27 Update Opeartions and FAQ

Aug11

Firstly, Many thanks to the users for their support and love for PCMtuner

After the 1.2.7 version update, all users need to download the PCM Suite installation package from the following website and install it.

Please download the PCM Suite installation package and install it from the website(www.tuner-box.com).

You can get the 1.2.7 version of the software as following.

After downloading, unzip and install.
After installation
1. Double click the desktop to run PCMtuner Flash
As the picture shows below:

2. Copy the machine code according to the software prompt, and send it to the mailbox (info@tuner-box.com).
Please send the machine code together with the serial number on the back of your PCMtuner hardware device to the mailbox to request the activation certificate in order to activate your PCMtuner Flash software. Usually the digital certificate will be returned within 30-40 minutes once we confirm that you are a legitimate user, from Monday to Friday during working hours.

The machine code on the back of the device is shown in the picture below.

3. Receive the tuner-box digital certificate and copy it to the folder (C:\Program Files (x86)\PCMtuner Flash). Do NOT modify the name of the digital certificate. The digital certificate name is shown as below.

4. Set the default opening method of the digital certificate to “PCMtuner Flash” as shown in the picture.

5. Set the “Language”, select English(United States) as shown in the picture.

6. It is best to set the display language to English. If your local language can work, you don’t need to choose English as the display language.

FAQ:
1）My computer starts reading and writing after updating pcmtuner 1.2.7, and it prompts that the PCMtuner Flash cannot be found(as the picture shows below). What should I do?
Answer: Please go to the official website(Tuner-box.com) to download PCMtuner Flash.
2) My digital certificate has been obtained and placed in the corresponding directory. When I open the software, it keeps prompting me to send the machine code to the tuner box mailbox.
Answer: Please set the default opening mode of PCMtuner lincese to PCMtuner Flash
3) After opening the PCMtuner flash, my computer has no response, and the software has no response.
Answer: Please set your “Region” to English as shown in the picture below, and check the unicode Beta version.

If the problem persists, please set the display language to English

If you can’t open PCMtuner flash normally after all the above steps, it means that there is something wrong with your computer system.
Please replace the computer or replace the computer system. If you are unwilling to operate, you can continue to use your PCMflash software as the working software.

Solution for PCMtuner flash No Found Problem

Aug10

PCMtuner ecu scanner is not updated to V1.27, when opening the software and click”Read and Write”, it will show“PCMtuner Flash not Found”

But how to solve this problem?Here we share steps to correct the problem.

1.Please download the PCMtuner Flash from official site”tuner-box.com” or from this download link and then install it.

2.After finishing the installation, please open it and then please send the”Serial Number” on the back of device and the ID to”info@tuner-box.com”

factory will send license file back to you.

3.When customer get the license file from factory,please copy it to”PCMtuner Flash”file.

for more steps,please check following videos

https://youtu.be/8p8TJM_VYnA

VOCOM II Mini Dongle WIFI Setting and Firmware Update Guide

Jul7

VOCOMII dongle, produced by ACTIA in Germany, covers all the functions of the VOCOM2 VOCOMII 88890400, which doesn’t need any cables accessories because it can be connected to the laptop via WIFI perfectly. It is a portable vehicle communication device for its size and weight.

Here we share the steps for wifi setting and firmware update guide

First of all, WIFI Settings

1.Power on the vocom2 dongle and the lights will be flashing. Find the WIFI signal Vocom2D_******* from the laptop. Click connect.

2.Input “v2d+ SN num”, SN number is 7 digits which you can find it from the back of the VOCOM2 dongle. Then click OK. And done.

Second, Firmware update guide:
Pls be sure that the vocom2 dongle be power up by 24V ECU or truck. Low voltage will be affect the firmware update.
1.After the WIFI setting well, go to All Programs and then VOCOMII.

Click the VOCOMII Configurator.

You will see the windows as below. And Click the place as the pictures bellowed.

Then choose “ Advanced” Update Device Firmware

You will see the windows as below. And Click the place as the pictures bellowed. And wait until it is finished.

It will run the TECH TOOL automatically when firmware update finished.

It is done now.

OBDSTAR X300 DP Plus Calculate YAMAHA MOTORCYCLE PROXIMITY 6-DIGIT PINCODE by Using Motorcycle IMMO Configuration 1

Jul5

OBDSTAR X300 DP Plus Calculate YAMAHA MOTORCYCLE PROXIMITY 6-DIGIT PINCODE by Using Motorcycle IMMO Configuration 1

Step1: please connect X300 DP Plus via main cable and also prepare P001 programmer and proximity key.

Besides, please keep Key Master DP Plus in charging and comunication in the whole process.

Step2:Select”Car IMMO”-“Pin Code”Newest Version-“Yamaha Motorcycle”-“NMAX”

Step3: There are 3 kind of method to tell how to get the pin code

Here is the Method 1: P001 read key ID to calculate 6-digit PIN

Connect P001 programmer with main cable

Enter the programm

Please note checking pincode requires 8 credits each time,click”OK”

Put original proximity key into P001 programmer,click”Enter”

Confirm 8 credits

PinCode had been read out successfully

Method2: Enter key ID to calculate 6-digit PIN

Enter key ID to calculate 6-digit PIN-“Enter”

Pls note checking pincode requires 8 credits each time,Click”Ok”

Please enter the 8-digit key ID,click”Enter”(key ID inside the proximity key)

PinCode has been calculated out successfully

Method3: Load eeprom to calculate 6-digit PIN(except for YAMAHA TMAX)

Load EEPROM to calculate 6-digit PIN-“Enter”

Checking pincode requires 8 credits each time, click”OK”

Load EEPROM of YAMAHA motorcycle,click”Enter”

Confirm 8 credits

PinCode has been calculated out successfully

Then add a key or do all keys lost via pin code

Autel Update Subscription Promotion

Jul5

Autel Update Subscription

Factory Flash Sale

Salve Up to 25%

Promtion Time:1st July-31th July

PCMTuner Module 71 Bench Mode Not Working Solution

Jul1

PCMTuner Module 71 Bench Mode Not Working Solution

Here are the tips if failed to read ecu edc17cp45, edc17c06 etc on bench mode with pcmtuner module 71.

PCMTuner comes with spare transistors for GPT circuits, lots of people damage these by connecting wrongly to ECU so these are replacements if it happens.

If you use OBD for power supply, please do not plug in a separate 12V, otherwise, it will cause the device transistor or step-down chip to burn.

MUST USE PCMtuner power supply!
If you use your own lab power and voltage regulator. You don’t know how device power works. Just adjust the voltage to 13.5 or whatever you think will cause the whole triode to burn out.

The solution here helps many users with similar problems. edc17c60, edc17cp45, edc17cp06 all tested working on bench mode.
Resoldered two transistors K1P, and work bench mode. One soldered K1P other analog p1P, I had only one K1P.

replace first this transistor, K1P, analog 1P,p1P

k1p mmbt2222a – 0.6A 40/75V and p1p pmbt2222a – 0.8A 40/75V

Read on bench module 71 successfully.

If not working after replacing these resistors, check other transistor positions and get it replaced.

PCMTuner Facorty Solution:

N1 transistor: MMUN2113LT1G
N2, N3 transistor: MMUN2211LT1G
Q3 Q9 Q10 Q11: MMBT222A-7-F
The corresponding positions are marked below:

Q3, Q9, Q10, Q11 transistor: with MMBT2222A-7-F
The corresponding positions are marked below:

Free Green Chiptuning Tokens for PCMtuner New Users

Jun29

Free Green Chiptuning Tokens for PCMtuner New Users

PCMtuner company now released a new promotion for new users.

Buy “PCMtuner” and get Green Chiptuning Tokens from “VZ-Performance Center”

Promotion: Customers who purchase PCMtuner products (complete set of PCMtuner machine or a single PCMtuner dongle) can get 3 green tokens for free (The total value is €270.00, which can be seen from the VZ-Performance official website), from June 28th to July 20th.

But how to get the 3 Free Green Tokens?

For customers who purchased pcmtuner products during the promotion.

a. After receiving the device, please complete the registration process.

b. After finish the registration, please log into VZ performance official website (https://support.vz-performance.com).

c. Create a “general support” ticket to request recharge as shown in the picture below.

VZ-Performance Green Chiptuning Tokens Can be Used for the Services Below:

GPF/OPF Removal

DPF Removal

EGR Removal

DTC Removal

ADBlue Removal

HOT Start Fix

IMMO Removal

Readiness Calibration

Flaps / Swirl Removal

TVA Removal

Sport Displays Calibration

Cold Start Noise Reduction

Kickdown Deactivation

StartStop Disable
MAF Removal

Speed Limiter Removal

Torque Monitoring Disable

Burbles Activation

Popcorn Activation

EVAP Removal

Exhaust Flap Removal

SAP Removal

AGS Removal

BMS/BPCM

Lambda/O2 Removal

Launch Control

OBD Reading Protection

Boost Sensor Calibration

LC, AL and NLS for MED9.1

Checksum Fix

Stage1

Stage2

Stage3

Tips to Read Honda CIVIC 1800 MED17.9.3 ECU by PCMTuner

Jun22

Tips to Read Honda CIVIC 1800 MED17.9.3 ECU by PCMTuner

PCMTUNER ECU Programmer Honda CIVIC 1800 I-VTEC 141HP 2012-2018 MED17.9.3 ECU Reading On Bench Tips:

Steps:

Use a universal cable connect the ECU to PCMtuner BENCH/BOOT port
USB cable connect laptop and PCMtuner
Power adapater connect PCMtuner for ensure power supply
You can read and write the ECU

Notice: dont forget make fullbackup before you do any work,that will always make your work safe Fullbackup mean read eeprom and flash then save it.

Please select the 71 protocols TC1793 for read flash and eeprom when you connect all cable and back to click start read and write(software will forward to read and write GUI).
Attention: all user better read fullbackup( read flash and eeprom) for keep safe.

Pinout Instruction:

CarOBD.de

sales@CarOBD.de

Autel IM608 Pro or Autel IM608, what is the difference?

Steps for OBDSTAR X300M adjust Mileage for Benz C Class W204

PCMtuner V1.27 Update Opeartions and FAQ

Solution for PCMtuner flash No Found Problem

VOCOM II Mini Dongle WIFI Setting and Firmware Update Guide

OBDSTAR X300 DP Plus Calculate YAMAHA MOTORCYCLE PROXIMITY 6-DIGIT PINCODE by Using Motorcycle IMMO Configuration 1

Autel Update Subscription Promotion

PCMTuner Module 71 Bench Mode Not Working Solution

Free Green Chiptuning Tokens for PCMtuner New Users

Tips to Read Honda CIVIC 1800 MED17.9.3 ECU by PCMTuner