Tag Archive | autel maxiim im608

Programming All Keys Lost on a 2015 Lexus NX300H Using the Autel IM608 PRO II

May23

Yes, the Autel IM608 PRO2 can be used to recover all lost keys on a 2015 Lexus NX300H. Due to recent changes in Autel’s software for Toyota and Lexus vehicles in the U.S., some features may be limited, which concerned the customer. To ensure the procedure went smoothly, I guided them through each step.

Required Tools

Step-by-Step Key Programming Procedure

Step 1: Identify the Vehicle and Perform an IMMO Status Scan

  1. Access the IMMO function.
  2. Select: Current Region >> USA >> NX300H >> 2015-2021 >> Smart Key >> OK >> Immo Status Scan.
  3. Check how many keys are currently registered.

Step 2: Use the “All Keys Lost” Hot Function

  1. Go to Hot Function >> All Keys Lost (with Analog Key).
  2. Turn the hazard lights on, then off. Press the start/stop button 5 times, leaving the ignition off.
  3. When prompted, confirm that IMMO data has not been backed up.<Ensure a stable network connection.>
  4. Turn off the ignition and cycle the hazard lights once.
  5. Note: Turn off the device’s Bluetooth, and connect the VCI directly to the diagnostic tool with a USB cable to avoid failure.
  6. Save the EEPROM file.
  7. Key type: SLK3.
  8. Connect the APB112 Key Simulator.
  9. Generate the analog key, which should remain in the “ON” position.

Step 3: Register the Key

  1. Connect the analog key to the Start/Stop button and press it.

If the device lights up, select “Yes” to proceed.
If it does not light up, select “No” to troubleshoot.

2.Hold the analog key near the START button, then place the new smart key near it as well.

Step 4: Add the New Smart Key Using APB112

  1. Select Add Smart Key >> Start.
  2. Turn on the hazard lights.<Note: Complete each step within the specified time.>
  3. Place the new smart key near the START button.
  4. If you hear a beep and the car starts, the new key has been successfully registered.
  5. To confirm, return to the IMMO Status Scan, where two registered keys should now appear.

Final Tips
If one tool can’t perform a function, consider trying another; each has unique strengths and limitations.
Even if the system displays “Failed,” check the physical key and system registry, as it may still be successful.

This process should restore all lost keys on the Lexus NX300H with the Autel IM608 PROII.

Autel IM608 Pro or Autel IM608, what is the difference?

Aug30

Autel IM608 Pro or Autel IM608, what is the difference?

Autel MaxiIM IM608 Pro with IMMO XP400 Pro is the most advanced and unique all in one key programming and diagnostic tool that combines advanced key programming, all systems diagnostics, and advanced services in one Android based 10.1-inch touchscreen tablet. It is equipped with XP400 PRO key programmer and MaxiFlash ECU programmer to provide complete coverage of IMMO and programming functions. IM608 PRO provides you with all special functions to quickly diagnose all modules for the majority of the makes and models on the market. It is the unprecedented key programming and diagnostic tool that you ever wanted.

Autel MaxiIM IM608 with Enhanced XP400 Key Programmer is the most advanced and comprehensive all-in-one car key programming and diagnostic tool that integrates professional key programming, all system diagnostic, Bi-directional control and 31+ reset services. Equipped with XP400 Key Programmer and MaxiFlash J-2534 VCI to offer complete IMMO coverage and programming functions. Autel IM608 offers smart mode and expert mode to satisfy different need and improve working efficiency.

1_68073539-162f-4c16-893a-425792378f00_800x800_看图王.web

The only difference between IM608 and IM608 Pro is the programmer that comes with the tablet. The tablets themselves IM608 and IM608Pro have no difference in terms of hardware and software. All keep the same. As for the difference of XP400 and XP400Pro, the main difference is the hardware upgrade

But the good thing is you can buy XP400Pro and optional adaptors together with any Autel key programming tool like IM608 and IM508 to have the same features with IM608Pro&XP400Pro and optional adaptors.

XP400Pro programmer upgrade and improvement compare to XP400
Fixed the problem of connecting the XP400 to the vehicle ODB connector causing the burnout of the device.
Fixed the stabilityproblem of using APB102 IR key to read/write.
Upgrade the hardware of programmer, Chip read/write function is more stable and support moreEEPROM chips.
Fixed theproblem of EERPOM adaptor APB101 can’t read/write EEPROM chip and rename it as APA129.
Rename accessories APA104、APA105、APA106 as APA107、APA108、APA109.
APA108 and APA109 cable length is shorter than before, reducingthe signal interference.

XP400 Pro add support for following chips
(1) EEPROM–>>AMD–>>AM29FXXX series chip；
(2) EEPROM–>> FUJITSU–>> MB29FXXXseries chip；
(3) EEPROM–>> ST–>> M29FXXXseries chip；
(4) Engine control module–>> ST–>> M29FXXXseries chip；
(5) IMMO–>> BENZ–>> ESL_W209_W906(Motorola) read/write/erase function；
(6) IMMO–>> BMW–>>EWS3 module read/write function；
(7) REMOTE_RENEW(renew key)–>> NEC–>> V51 and V57 chip read/write/erase；(Support original dealer key learning with key dump mode.)

XP400 Pro adds support for following adaptor board
(1) APB113 PCF79XXadaptor；
(2) APB114 EWS3 adaptor；
(3) APB115 NEC Adapter；
(4) APB118 NEC ELV adaptor；
(5) APB119 TB28FXXXadaptor；
(6) APB120 TMS370adaptor；
(7) APB121 AM29FXXX Adaptor；
(8) APB122 AM29FXXX adaptor;
(9) APB123 AM29FXXX adaptor;
(10) APB126 M35080/D80 adaptor board；
(11) APB127 MC68HC0(7)05BXX adaptor；
(12) APB128 MC68HC05X32 adaptor；

X400pro supports 12 types of unlocking smart key
BMW E Chasis remote control
OE 315 remote refresh
OE 868 remote refresh
Aftermarket remote control refresh
BMW F Chasis remote control
315 remote refresh
433 remote refresh
868 remote refresh
Audi–semi smart key
PCB2_8T0959754_433_REMOTE
PCB2_8T0959754D_868_REMOTE
Audi–smart key
PCB3_4H0959754DA_433_SMARTKEY
PCB3_4H0959754DB_315_SMARTKEY
PCB3_4H0959754DD_868_SMARTKEY