2021 DUCATI MULTISTRADA V4 S 8A TRANSPONDER KEY PROGRAMMING PROCEDURE By Using MOTOMASTER
- Prerequisites for Key Programming
1. The vehicle’s original immobilizer system must be free of faults. No immobilizer warning light should be solid or flashing on the dashboard, and communication to the ECU and immobilizer module must be
normal.
2. At least 1 valid original key capable of starting the vehicle normally is required for scanner communication verification and immobilizer security validation.
3. The key to be programmed must be an original, brand-new blank 8A immobilizer key. The transponder must be unprogrammed and notpreviously bound to any vehicle’s immobilizer data. (See key diagram below:)

- Preparation: MOTOMASTER, M001A, M041
- Detail Steps:
①Select【MOTO Diag】>【DUCATI】> Latest Version >【Diagnosis】


③Sequentially select 【M】 >【Multistrada V4 S E5】 > 【1262】 >【MY 421】 ;

⑤Click【Hands Free (Smart Key)】and tap【Enter】;
⑥Click【Special Function】, follow the prompts, enter the password 123, Click【OK】;



⑨Place the key to be programmed more than 3 meters away from the vehicle. Place the original working key at the vehicle’s antenna location and wait for the system to identify it ;
(Antenna Location: Front section of the fuel tank / central area below the instrument cluster, near the steering lock)
⑩Position the original key just used on the antenna and Click【OK】;

⑪The original key (Key 1) has been successfully identified and programmed and Click【OK】;

⑫Place the new key to be programmed at the antenna location and wait for the programming process ;

⑬The new key has been successfully programmed. Select【Cancel】to exit (or tap【OK】to continue programming a second new key) ;

Summary
Pls strictly follow your device tips in your operation process.





























