Tag Archive | digimaster3

How to do Digimaster 3 Self-Check ?

How to do c selfcheck (equipment check) ?

When the software prompts “please connect the self-test adaper to the DB15 interface to the equipment!”, please connect the self-test adapter to the DB15 interface of the equipment and click the “ok” button.
DB15 is normal when 5V LED and 12V LED on the self-test adapter are lighting but 9V LED.
If not the state, it may have been damaged. The testing situation of the internal module will be detected in the message after the testing.

digimaster-iii-blog-1
If you do not have the self-test adapter, when the software prompts “please connect the self-test adapter to the DB25 interface of the equipment,” please follow the below the wiring operation, it’s the same color points which are rang up,
and connect them together (except which has a voltage identifies), then use a multimeter to measure the voltage of the corresponding point.

digimaster-iii-blog-2

Digiprog3 compare with Digimaster 3

If you want one mileage correction device to do most normal brand cars, you can chooseDigiprog3 is enough. But for the new and high-end cars, you need to use Digimaster 3.
At the same time, if you want to choose one multi-function mileage correction, theDigimaster 3 is the best choice. Digimaster 3 contains the advanced technology of programming new keys for BMW and Benz, CAS-BDM reading/writing and resetting; 35080V6 erasure etc.
Digiprog3 compare with Digimaster 3