Tag Archive | kd-x4

KDYDIY KD-X4 Copy NCF29AX Series Smart Key using KD ZB71 Remote

Apr20

KDYDIY KD-X4 Copy NCF29AX Series Smart Key using KD ZB71 Remote

Keydiy KD-X4 and KD-MAX update NCF29xx smart key synchronization function(read original key data to copy/add smart key) on April 17th 2026

Keydiy will read original key data for the following smart key chip types:

NCF29A1
NCF29A4
NCF29A2
NCF2953
NCF29A3
NCF2954

Device Used:
Keydiy KD-X4 or KD-Max key tool
Keydiy ZB71 smart remote (Must write data into the KD ZB71 remote !!)
Keydiy #13 NCF29xx interface board
Original key


Kindly Note:
Update the KD device App to the latest version.
It is not a simple read and copy procedure. Some keys require removing the chip and solder onto the KD interface board to read OEM key data.

Don’t need to generate remote program before reading key data.

Procedure:
Step 1: Remove the chip from the original car key.

Disassemble the original smart key and remove the NCF29Ax chip from the OEM key.

Step 2: Solder the chip on the KD #13 NCF29xx adapter

Connect the KD #13 adapter with KD-X4 or KD-Max

Step 3: Read chip data
Go to Remote Function-Smart Key Clone-Universal Smart Key Synchronization


Synchronize the remote data and key ID of the original NCF29Ax single chip to KD ZBX and ZB7 series smart key
It can be used directly on the vehicle without programming.

If don’t have KD#13 adapter, follow the wiring diagram to solder wires to the key circuit board.

Read Chip Data
Save chip data

Remove the #13 adapter from KD-X4
Resolder the chip back to the orignal key.

Step4: Write the chip data onto the KD ZB71 remote
Connect the KD 29AX and 29A7 series smart car using 6-pin programming cable.
Connect the programming cable with KD-X4 device.

Generate dealer key
Generate dealer key successfully

Install the key shell to the KD ZB smart remote.

Don’t need to program key in car after writing KD remote
Test the KD and OEM key’s function

For more informations,please contact Technical Service

Whatsapp: +86 19947637411
Email: Sales@Carobd.de

Keydiy KD-X4 Now Will Modify Original VAG MQB49 5C 5D Key ID !!!

Apr14

Good News for everyone- the KEYDIY KD-X4 key programmre can modify the ID of original factory VAG MQB49 5C and 5D keys.
. In previous versions, the KD-X4 could only change the ID of the KD’s own 5C/5D keys. With latest update, the KD-X4 can also change the ID of original keys.

Fairly new update within the past few days.

Changing the original key ID will take 100 coins each time.


Example:

Done a VW ID.3 2021 MQB49 5D key. Changed factory key ID. Cost 100 coins to do. No SFD lock, 5D done today for ID.3 2021, changed factory key, cost 100 coins to do.

Used OEM board, second hand from ebay. Worked a treat, carefully split case, then glued together and reassembled. No one will even know. It does cost 100 coins to rewrite original board ID, but did the job.

To be fair KD FGB would be better option with the wireless remote generation. Without KD solderless adapter, you have to solder wires on the origina key.

NOTE:
Modify the ID of KD’s FGB remote does not require points.
CGDI K2 and YANHUA ACDP will also modify OEM 5C/5D key ID.

For more informations and technical support,please contact

Whatsapp: +86 19947637411
Email: Sales@Carobd.de

How to Change MQB49 5C 5D Key ID with KEYDIY KD-X4 ?

Mar3

How to Change MQB49 5C 5D Key ID with KEYDIY KD-X4 ?

How to change VAG MQB49 5C 5D key ID to match original system in KEYDIY KD-X4 ?This is a frequently asked questions of Keydiy MQB49 function.

Here is the clue

First of all, need to disassembel and read original key data. then generate a service code.

Keydiy will display two key IDs. Place original key into the KD-X4 induction coil, it will display key ID and check which ID between these two is the original key ID.


We can write the ID of the original factory key on the key to be matched.
After programming the dealer key, we will write this ID to it .

Note: Only keydiy remot allows modification of ID.

Select the Service code-choose FGB remote and generate dealer key.

Select Chip function-Automation detection clone.

Place the keydiy FGB remote to the KD-X4 induction coil.

Hit Start indentifying.

It will read chip type and ID. Hit Chip Editing.

Modify the ID to original key ID

Write ID successfully.

Identify remote informatio again.

Now you can see key ID has been changed.

Why change key ID if we are copying the original key data ?

It will work without changing the ID, but it is recommended to use and ID of the exsiting factory position (when customer don’t have both keys) to avoid issues when it is performed programming with odis.

To use on position(ID) where sync exists on all modules. When a car modules is reprogrammed via ODIS online, the key will work; otherwise it will stop working. And other points.

After changing key DI to march original system, then you start learnig keys in car.

For more informations ,please contact Customer Service

Whatsapp: +86 19947637411
Email: Sales@Carobd.de

How to Active KEYDIY KD-X4 MQB Match/AUDI BCM Function

Jan23

KEYDIY KD-X4 is now support MQB Match/AUDI BCM Function, but need to pay cost 75USD to active or 2500KD coin to active.

Problem:

But how to pay the cost to get MQB Match/AUDI BCM function ?

Steps:

Once recharged to wallet, then can pay cost 75USD to get the function.

For more informations,please contact

Whatsapp: +86 19947637411
Email: Sales@Carobd.de

 

 

Seat Arona 2020 MQB49/5C non keyless flip remote key via KD-X4

Jan22

Seat Arona 2020 MQB49/5C non keyless flip remote key.
Read data from working key with KD-X4 ✅️ Generated KD VW style ZB remote ✅️
Programmed to car OK ✅️
But
❌️ Remote in new key doesn’t work. I tried every software from KD for MQB49/5C. One from standard remote list and two from smart keys list.
Gonna test with original key soon.
KEYDIY team please check this out and fix software.
✅️ Good job by creating such solution to read CS data, well done 👏

for more informations,please contact

Whatsapp: +86 19947637411
Email: Sales@Carobd.de