Tag Archive | SKP900 key programmer

How SKP900 Key Programmer add Toyota G chip and H chip key?

This blog is going to show you how to use SuperOBD SKP900 Key Programmer program Toyota G chip key and Toyota H chip key. This guide is tested on 2015 Toyota Sequoia (G chip) and 2014 Toyota Corolla (H chip). Hope it helps you!

How SKP-900 Key Programmer program Toyota G chip key?

First, start SKP900 and select “Immobilizer” function

Choose “Toyota” then “Immobilizer 2”

It will show “Choose OBD2 adapter, turn ignition on”, then turn ignition on with the original key. Press Enter button and wait for it is communicating.

Next, select “Add Key” then it will show “Insert the registered key and turn ignition on”, press the Enter button to continue.

Then, it will ask you to “Insert an adding key and turn ignition on”, so insert the new Toyota G chip key and press Enter button.

Now just wait the immobilizer light go off for about one minute. After the IMMO light is off, the new key is programmed successfully!

How SKP900 Key Programmer program Toyota H chip key?

The procedure is same as SKP-900 programming G chip key. You can follow G chip key programming to add Toyota H chip key.

SKP900 Key Programmer Land Rover All Key Lost Car List

Sep26

SuperOBD SKP-900 key programmer is advised for both experienced locksmith and car owners. It supports program Land Rover key when all key lost, many other brands as well. This blog will show you which models all key lost SKP900 support and how to do.

SKP900 Land Rover All Key Lost Car List:

SKP900 Support All Key Lost for These Cars (Tested):

2010-2015 Land Rover Discovery IV (L319)

2010-2013 Range Rover sport (L320)

2014-2015 Range Rover sport (L494)

2010-2012 Range Rover mark III (L322)

2013-2015 Range Rover mark IV (L405)

2012-2015 Range Rover Evoque (L538)

2012-2014 Land Rover freelander II (L359)

2010-2013 Jaguar XF (X250)

2010-2014 Jaguar XJ (X351)

How SKP-900 program key for Range Rover sport (L494) when lost all key?

First, Choose “Keyless Program”

It will show “Key quantity: 1” then press “Enter” button to continue.

After that press the “Unlock” button of new transponder key quickly in 5 seconds.

Then follow tips to repeat press key “Unlock” button.

It will show “Detected key place: 2”, press “Enter” button to continue.

Now SuperOBD SKP-900 successfully add new transponder key for Range Rover sport (L494) lost all key.

How SKP900 key programmer add Range Rover remote key?

Sep20

SuperOBD SKP900 is a powerful OBDII auto key programmer with wide vehicle coverage. So definitely SKP900 can program Land Rover Range Rover remote key! Following how-to guide will show you step by step.

Step1. Choose “Land Rover”→ “Range Rover”.

Choose “Immobilizer System”, follow tip to turn the ignition on and press “Enter” button.

Step2. Choose “Add Keyless Type 1”.

Put the original keyless remote near to the gear shifter and press “Enter” button.

Then turn the ignition off.

Step3. Now SKP-900 will ask if the program turn the ignition on, check and confirm it.

Key quantity: 2

Step4. Quickly press the keyless “Unlock” button once in 5 seconds and press “Enter” button. Then press keyless “Unlock” button in 5 seconds again. It will show “communicating”.