Formulaflash New Upeate V1.1.8.0 Coming Soon !
New Protocol Support
Nisan SID310
Renault SID310
Ford EMS2101
Fiat 7GF KWP/CAN
HO2 off ME 7.8.8
HO2 off ME9.7
HO2 off MED17.5.20
HO2 off ME17.9.7
Formulaflash New Upeate V1.1.8.0 Coming Soon !
New Protocol Support
Nisan SID310
Renault SID310
Ford EMS2101
Fiat 7GF KWP/CAN
HO2 off ME 7.8.8
HO2 off ME9.7
HO2 off MED17.5.20
HO2 off ME17.9.7
RENAULT CLASSICS UPDATE: Sagem S2000 now live via OBD (BETA)! 🇫🇷🚗

Time to support the ultimate daily drivers and French “Youngtimers”! The Sagem S2000 ECU, powering a massive amount of Renault vehicles from the 2000s, is now supported on your AutoTuner Tool.
The perfect opportunity to offer performance tuning or customized fueling upgrades on extremely popular engines, ranging from the eco-friendly 1.2L up to the punchy 2.0 Turbo! 📈🌿
Method: 100% OBD (Normal Read)
Status: BETA Protocol (we value your field feedback!)
Clean workflow: Plug into the OBD port, read, and flash.
Unmatched Fleet Coverage:
✅ Clio II, Twingo I, Kangoo I 🎒
✅ Megane II, Scenic II, Trafic II 🛠️
✅ Laguna (I, II, III), Espace IV, Vel Satis & the iconic Avantime! 🛸
Update your Tool software today and welcome a legendary generation of Renaults to your dyno! 🔌
The AT Team
Key Features:
⚙️ Type: Engine Control Unit (ECU)
🔌 Mode: OBD NR
🧩 Readout: Calibration
🖥️ MCU: C167
⏱️ Read time: 45sec
⏱️ Write time: 2min 30sec
✅ Checksums correction
Compatibility List*:
🚗 Renault Models: Avantime (2001) / Clio II (1998+) / Espace (2002) / Kangoo I (1997+) / Laguna (2001 – 2007) / Laguna I (1994+) / Laguna II (2001+) / Laguna III (2007+) / Latitude (2010) / Megane (2002) / Scenic (2003) / Trafic II (2001+) / Twingo I (2000+) / Vel Satis (2002)
🔧 Renault Engines: 1.2 / 1.2 8v / 1.2 16v / 1.4 / 1.4 16v / 1.6 / 1.6 8v / 1.6 16v / 1.8 16v / 1.8i 16v / 2.0 16v / 2.0T / 2.0T 16v
Good News to Customers
A fresh mobile experience has just landed to redefine how you use your mobile flasher! We are thrilled to introduce the latest major update to the MyFlasher app, the essential companion to your The One device. It has been carefully designed to make your daily tuning routine faster, cleaner, and more intuitive.
Here is a look at what’s waiting for you inside the new version:
🎛️ A Brand-New Dashboard
We have completely overhauled the MyFlasher home screen. It’s fresh, clear, and perfectly focused on keeping you locked into what matters most at the exact moment you plug into a vehicle. Packed with smart recommendations, it dynamically guides your next move to save you precious time during your mobile tuning sessions.
🇪🇸 ¡Bienvenido! & Benvenuto! 🇮🇹
Our global community of The One users is expanding! The app now fully supports Italian and Spanish. Simply head over to your settings and pick the language you’re most comfortable with.
🔍 iOS Text Size Support
Vehicle cabins and workshop environments demand good readability. MyFlasher now fully respects your system-wide iOS text size settings. Enjoy better visibility and a tailored layout that scales perfectly to your custom reading preferences.
⚠️ Technical Note: This update requires iOS 15.4 or later. Head over to the App Store right now to upgrade your MyFlasher mobile experience!
How to Use Xirdecoder ECU Tuning Software for EGR DTC Off Hardcut Stage 1
Xirdecoder is a leading software platform in automotive chip tuning, offering cutting-edge solutions for vehicle optimization. With a vast database for over 130,000 files,it provides professional-grade tuning for Stage 1 to Stage 3 modifications, including EGR/DTC/Vmax/Adlue off, Launch control,and Hardcut limiters.
In this guide, we’ll demonstrate how to use XirDecoder ECU Tuning software to modify a BMW Bosch EDC17C50 ECU, covering Hardcut, EGR removal, and Stage 1 tuning. The same process applies to other programmers like Flex, Autotuner, FC200 and more.
Why Choose XirDecoder ?
Extensive Database-Supports over 130,000 ECU files.
Multi-Function Tuning- Covers Hardcut, EGR/DTC/Vmax etc removal, Stage 1- Stage 3 tuning and more.
Compatibility- Works seamlessly with Foxflash, Flex, Autotuner, and other leading tools.
Xirdecoder has 3 configurations:
If you do not renew your annual license after one year, your access to the system will be temporarily suspended. This is due to the ongoing costs of maintaining our online serve infrastructure and the constant support provided by our engineering and AI teams. However, as soon as you choose to renew your license, your access will be fully restored.
How to use XirDecoder ECU Tuning Software ?
Upload Your File: Use a master device to read your ECU’s file and load it into the system
AI Analysis: The platform’s AI scans your file and suggest the best tuning options.
Select&Download: Upload your file and select the options you need. Within seconds, the AI will process your uploaded file based on your selections.
Additionally, if the uploaded file is not original, XirDecoder will detect non-original maps such as EGR and notify you. If desired, you can convert only the EGR maps back to their original state.
Example:
Step1: Read the ECU
1. Connect the ECU programmer to the EDC17C50 ECU(bench mode)
2. Read and save the original ECU data.
Step2: Perform hardcut function:
1. Open XirDecoder software and select Hardcut function.
2. Choose the vehicle brand and ECU model (EDC17C50)
3. Upload the original file read in Step1
4. Set the desired RPM limit (e.g, 4000RPM for a bouncing limiter effect)
5. Download and save the modified file.
Note: Xirdecoder does not perform checksum correction – this must be handled by your hardware tool.
Step3: Perform other modification( EGR Off, Stage 1, etc.)
In XirDecoder, select the EDC17C50 ECU again.
Upload the original or Hardcut-modified file.
Choose desired functions:
EGR OFF( disable exhaust gas recirculation)
D-P-F OFF (remove diesel particulate filter restrictions)
VMAX OFF( eliminate speed limiter)
Stage 1( optimize fuel and boost maps for increased power)
Click Download and save the final modified file.
Step 4: Write file
Write the modified file back to the ECU.
Verify that all changes are applied correctly
For more technical support,please contact
Jenny
Whatsapp: +86 19947637411
Email: Sales@Carobd.de
The iconic Youngtimers from Mercedes-Benz have arrived on your AutoTuner Tool! Tune the legendary 180, 200k, and 230k engines directly through the diagnostic port.
Coverage:
✅ Mercedes C-Class
✅ Mercedes E-Class
✅ Mercedes CLK
✅ Mercedes SLK
Method: 100% OBD (Normal Read). A fast and perfect solution to boost these bulletproof blocks or perform E85 conversions! 🔌
The AT Team
Key Features:
⚙️ Type: Engine Control Unit (ECU)
🔌 Mode: OBD NR
🧩 Readout: Calibration
🖥️ MCU: C167 (29F400)
⏱️ Read time: 1min 45sec
⏱️ Write time: 1min 30sec
✅ Checksums correction
Compatibility List*:
🚗 Mercedes Models: C (2000) / CLK (1998) / E (1995) / SLK (2000)
🔧 Mercedes Engines: 180 / 200 Kompressor (2.0k) / 230 Kompressor (2.3k)
For more technical support,please contact
Jenny
Whatsapp: +86 19947637411
Email: Sales@Carobd.de
Problem:
Magic Motorsport Flex programmer reads Peugeot 307 SID807EVO ECU ok, but can not write the modified file by OBD. It is a keyless system.
Error autohrization from ECU failed.
The keyless ones have to see the key in the emergency key position to allow operation.
Key must be in a coil detection area, that is why you couldn’t read.
Put key in the correct compartment and try again. Put key in the slot beside the steering.
Also if manual put it in 1st drivers seat belt on and hazards
Optional Solution:
Try leaving the ignition on even when it asks you to turn it off, or disconnect the battery for a while and try again.
Play around with ignition on off timings. Don’t wait for flex, when it says ignition on click ok and then wait around 5-5 seconds before you turn it on. If you’ve done any resets with diag make sure ignition off for 2 minutes before you connect flex
SID87 EVO if password protected can be done obd, if non password protected boot only,, should still connect to update to latest software.
User feedback:
Disconnected battery for some time did the fix and worked
FormulaFlash V1.1.6.0 Released: New Support for SID201,SID805, SID803A&More ECUs
April24,2026- The latest software update for the FormulaFlash ECU programmer, Version 1.1.6.0 is now officially released. This update introduces 13 new protocols across Fiat, LandRover, and PSA vehicles, further expanding coverage and improving performance for professional ECU tuning and diagnosis.
As we move into a busy summer season, even more updates and protocol expansions are already in development.
What’s New in Version 1.1.6.0
This update focuses on enhancing compatibility with popuplar ECU types, especially the widely used Continental SID series.
Newly Supported ECUs by Brand
Fiat
Land Rover
Improved support for advanced Continental ECUs:
PSA(Peugeot/ Citroen)
Major expansion for the Continental SID ECU family, covering multiple variants:
Why This Update Matters
This release significantly enhances FormulaFlash’s capabilities in handling Continental SID ECUs, which are widely used in modern diesel vehicles across European brands.
With added checksum support for selected models, users can now perform safer and more reliable ECU operations without external tools.
What’s Next ?
The formulaFlash developement team is actively working on further improvements and new protocol releases. Expect continuous updates throughout the summer, bringing even broader coverage and enhanced functionality.
Final Thoughts
with the addition of 13 new protocols and expanded support for key ECU types, FormulaFlash V1.1.6.0 continues to strengthen its position as a reliable and powerful tool for ECU programming professionals
Stay tuned for upcoming updates-and make sure your device is always running the latest version to get the best performance.
For more technical service ,please contact
Jenny
Whatsapp: +86 19947637411
Email: Sales@Carobd.de
A customer recently reported the following issue with their FormulaFlash ECU Programmer
“My device stopped providing power in bench mode. The LEDs no longer light up. Is there any chance of repairing it? It is still under warranty.
After inspection, the root cause was identified as a burnt FB0 resistor on the PCB board, which resulted in a complete loss of power output in bench mode.
Root Cause Analysis
The failure is typically caused by:
The damaged component (FB0 resistor) plays a key role in the power circuit. Once it is burnt, the device will:
Repair Solution
Method 1: Replace with a 0 Ohm Resistor
The recommended solution is:
This acts as a jumper and restores the circuit continuity.

Method 2: Use a Donor Resistor from the PCB
If a 0Ω resistor is not available, you can:
Important Notes
Preventive Tips
To avoid similar issues in the future:
Conclusion
A FormulaFlash device that shows no power in bench mode and no LED activity is often caused by a burnt FB0 resistor. Replacing it with a 0Ω resistor or using a donor component from the PCB can effectively restore functionality.
If you are unsure about the repair process, always consult technical support or refer to the official documentation
For more informations,please contact technical service
Whatsapp: +86 19947637411
Email: Sales@Carobd.de
The Bosch MD1CS003, the essential ECU managing the extremely popular 1.5 BlueHDI, 1.5 Turbo D, 1.5 Multijet, and 1.5 D-4D engines, opens the doors to a massive market across the Stellantis group and Toyota.
🔒 Method: Bench (After Mail-in Unlock) To guarantee the long-term protection of this highly sought-after solution and secure your business, this protocol requires the ECU to be sent to us for unlocking first. Once the Mail-in Unlock is complete, you will be free to read and write the ECU via Bench Normal Read (NR) right in your workshop.
Compatible Models:
Citroen – Berlingo, C3 / Aircross, C4 / Cactus / Space Tourer, C5 Aircross, DS3 Crossback, DS7 Crossback, & Jumpy
DS – DS7 Crossback
Fiat – Scudeo
Opel – Astra, Combo, Corsa, Crossland X, Grandland X, Insignia Grand Sport, Mokka, Vivaro, & Zafira Life
Peugeot – 2008, 208, 3008, 308, 5008, 508, Expert / Traveller, Partner, & Rifter
Toyota – ProAce, & ProAce City
Vauxhall – Astria, Combo, Corsa, Crossland, Grandland X, Insignia, Mokka, Vivaro, & Zafira
Supported Engines:
1.5L – Diesel, BlueHDI, D-4D, Ecotec D, MultiJet, & Turbo D
For informations ,please contact
Whatsapp: +86 19947637411
Email: Sales@Carobd.de
One-Click Reading of ECU&TCU CS Codes for VAG
Formulaflash released a powerful and unique software package: One-Click reading of ECU and TCU CS codes for VAG,specially designed to simplify MQB all keys lost key programming .This solution allows locksmiths to quickly and reliably read CS codes directly from the ECU and TCU with just one click-no complex procedures and no time-consuming steps.
Support Models:
MED17
EDC17
DQ200
DQ200gen2
DQ250 MQB
DQ250Fxx
DQ400e