Archive | May 2016

(Fixed) Audi A4 1.8T 2007 car not start after reading with Galletto V54

How to fix  the problem with Audi A4 1.8T 2007 that the car not start after reading with FGtech Galletto V54?

Car model and year:

Audi A4 1.8T 2007 163hp

8E0909518AQ_0261208524_1037372505

ECU programmer to use:

Galletto v54 that I bought from here.

fgtech-blog-1

fgtech-blog-2

fgtech-blog-3

Problem Description:

I have a big problem with Audi A4 1.8T 2007 163hp

8E0909518AQ_0261208524_1037372505

I read this with Galletto v54 with OBD…

1.8 Turbo 150/180CV ME7.5.1 29f400BB..galletto say change driver

1.8/2.0 Turbo 150/180CV ME7.5.5 29f800BB….read success…100% Ignition off…

After a small talk with customer when will write the remap….he wants to drive off…car not start

VCDS go ECU an read fault code say “programming process not finished”

I have just read, not write…

The file is not corrupt—look Attachment, easy the original write OBD???

https://mega.nz/#!ZYZnWbAI!d2kYHLCDsf9kFZ-KssnG4ys3ggVURlOIV0Qcrn4v2HY

Solution:

Update…the car is running

-> I remove fuses from Dash and Radio\Navi

-> use a good bosch power supply (14V)

-> Delete all fault code VCDS

-> Write the same file was read before with FGtech V54

-> Note all prompts from galletto about ignition on/off

-> Car start….running

-> Delete all fault code VCDS

Original Digimaster 3 Free shipping On Autodiagtool.de

Digimaster 3 Digimaster III Original Odometer Correction Master Update Online

Digimaster 3 is also called Digimaster III or shortly D3 is new developed odometer correction master. It works with various types of adapter you can easily achieve odometer correction, audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz &BMW etc.

digimaster-3-digimaster-iii-original-odometer-correction-master-8

Language: English

Newest Hardware Version: V1.8.1504.24
Unlimited Tokens
Kindly Note

All digimaster 3 has already been registered before shipped out. So no need register again. Customer who want buy digimaster 3 please do have basic knowleage about chip desoldering.Techinical question about DIGIMASTER III, please check our techinical service next to the description.

Digimaster 3 update kernel After update EBOOT, it is necessary to update kernel. Tips: Before update EBOOT, please instal D3 TOOL first.
Step 1: Click button “8” and “OK” together, then power on. The indication of “Press OK to continue and ESC to cancel” will appear on the screen. Press “OK” into Renovation.
Step 2: “Found new hardware” is found in the system when you connect USB cable with the PC.
digimaster-iii-1
Step 3: choose “install the software automatically”, click “next”.
Step 4: If DIGIMASTER 3 has been installed already, choose the second “SEC SOC SMDK Board” in dialog box, and click “Next” to complete driver installation.
digimaster-iii-2
Step 5: Double-click Digimaster 3 PC Tools and choose “Kernel Update”.
digimaster-iii-3
digimaster-iii-4
Step 6: Indication ” USB connect succeed “will appear as below after the USB is connected.
digimaster-iii-5
Step 7: click “Kernel Update”, choose “EBOOT_20110427.bin” then click “OK” to start EBOOT program update. Step 8: After 10sec. the DIGIMASTER 3 screen appears a twinkling red ‘YH’ logo which means EBOOT update is complete.
After update EBOOT successfully, please turn the power off and choose an appropriate way to update the kernel.
TIPS: Please unload the anti-virus software and firewall temporarily in order to run the software normally.

Customer Share with How to Operate the Original Xhorse VVDI Benz VVDI

Original Xhorse VVDI Benz VVDI MB TOOL Key Programmer Including BGA Calculation support BE key,read password and prepare new key via IR and support all Benz Keys, but dont support Benz Key Lost.

xhorse-vvdi-benz-tool-including-bga-calculation-blog-1

My Customer Share with you:

Q: I bought EIS W221 lock with a key from the lock from one machine. I have read the PSW. I will make a complete loss of W221 key in the future?
Describe step by step procedure
A: you have uesd/2nd-hand EIS with working key,you can do like this for W221 all key lost
1.read all key lost EIS data-> save EIS data
2.read used EIS data enter password,get erase password->renew used EIS.
3.load step1 EIS data to renewed EIS with password->write EIS data
4.load EIS data(with key password)->prepare key file
5.input new key to device IR reader->load key file->write
6.insert new key to EIS->EIS will learn the new key->key learn success

by the way,if your all key lost W221 is motorola EIS,not need to change EIS,remove eis get eeprom by programmer(VVDI PROG).
then load eeprom to VVDI MB TOOL prepare key file.
Q: I have a w204 All key lost and i program a new EIS with VVDI, the ignition doesn’t come on or crank, but the steering can lock and unlock. can someone guide me what to do?
A: about W204 all key lost(change new EIS),refer to following steps,maybe helpful:
1.Read EIS data via obd,then Save EIS data
2.adapt ESL:Read ESL data->Get Erase Password->Renew ESL
3.Change new EIS, Load EIS data(step1)->write Key Password(enter manually and at random)->Write EIS data
4.Personalize W204 ESL
5.Load EIS data(with Key Password)->Prepare Key File
6.Input new Key to device IR reader->Load Key file->write
7.Insert new Key to EIS->EIS will learn the new key->key learn success

If you have any good suggestion,hope you can share with us.

ECU Chip Turning device

What is the ECU?

ECU is Electronic Control Unit,also call Trip Computer,just like Computer,it is control all the running  device.

Here has same ECU chip turning on www.carobd.de

V2.22 KESS V2 Manager Tuning Kit :

V2.22 KESS V2 Manager Tuning Kit master with Unlimited Token and Renew Button Firmware V4.036, add more latest protocols and ECUs, more detailed cable connection instruction.new-kess-v2-manager-tuning-kit-master-version-blog-1

Ktag K-tag KTM100 V2.13 Firmware V7.003 Master Version ECU Programmer :

ktag-ktm100-ecu-programmer-blog-2

Ktag KTM100 V2.13 Master Version ECU Programmer with newest Firmware V7.003 and renew button, no tokens limitation. This Ktag newly Add BMW Gasoline F Chassis and Mercedes W222. K-tag V7.003 work more stable and conveient. After you choose car model, it will automatically identify ECU model and chip type.

How to: Mazda CX5 correct mileage using OBDSTAR F100

The newly released OBDSTAR F100 provides one more choice for the technicians who need to correct mileage for for Mazda and Ford car models.

Following parts are about the steps for Mazda CX5 correct mileage using OBDSTAR F100.

Mazda Mileage correction tool to use:

OBDSTAR F100 pro.

Note: the original F100 pro is made by OBDSTAR Company, and there are some authorized dealers e.g www.carobd.de

Mazda model to test:

Mazda CX5

Steps: Mazda CX5 correct mileage using OBDSTAR F100:

Plug F100 pro into the car OBD port.

F100 programmer boots, and press ENT

Select Mazda CX5

F100-mileage-correction-blog-01

Turn on ignition

F100-turn-on-ignition-blog-02

F100-mileage-correction-blog-03

Before modify the mileage value. Please execute [ Data backup] function.

Press ENT, and it establishes communication.

Please turn off the ignition switch and then turn the ignition switch on.

Choose “Mileage Adjustment”, press ENT to go on and ESC to back.

F100-mileage-correction-blog-04
Remark: if kilometer value with readout instrument shows the number of …

Communication…

Please turn off the ignition switch and then turn the ignition switch…

Then go on reading mileage as follows…

F100-mileage-correction-blog-05
Current mileage value: 1200 KM

Please confirm the mileage value correct

Please enter the value you want to adjust-XXXXXX (eg:000210)

Enter Value: XXXXXX(eg:000210)

Communication…

Please turn off the ignition switch and then turn on the ignition switch.

F100-mileage-correction-blog-06
Adjusting mileage…

Complete.

F100-mileage-correction-blog-07
Hope it helps.

MINI VCI techstream V10.30.029 Success Case

MINI VCI techstream V10.30.029 Success Case

Start by purchasing Xhorse Mini VCI cable Techstream software even here:

http://www.carobd.de/wholesale/cheap-mini-vci-single-cable-for-toyota.html

cheap-mini-vci-single-cable-for-toyota-blog-1

The price of a pair of tens. Reads and does everything and a bit more. (Visit the Toyoon with the OBD connector that is, from the 1996 vissiin)

For you to read the AHC’s pressures that are likely to be too high. The front end is handled springs (torsion bars) tightening, the rear springs can be reached in the exchange. They are marmoritiskillä I remember a couple of hundred / piece, lower prices can be viewed even if the www.partsouq.com, there can be found in an exploded view. Exchange is a piece of cake. The springs are of different length, the left somewhat longer. In another pink and one purple color of the character, I do not remember either way. AHC-shoot springs is a lot looser when the norm-iskariversion.

Then, when the springs and the AHC’s neutralizing pressure is in place so it’s time to look at the condition of iskarien. Iskarithan is not what it seems iskareilta, they are alone without hydraulic damping and probably all right. Shocks is the balls (and control valves), which has a total of four, two on each side between the rocker and the frame. the condition of Niitten get a hint about when comparing AHC fluid reservoir (the co-driver in the corner under the bonnet white tank) liquid level between upper and lower positions of the suspension. Bowl on the side of a measuring scale, at least 7, but preferably 11 line should be between the upper and lower positions. If it is less so the balls of the former. the normal pressure due to the above-mentioned rautajousista If you do not have kohdillaan as those line readings are not reliable, then no.

Balls hell to pay at Toyota, Would it 700-800 / pc England but can be found in the Pleiades called company which has the whole set (4 pieces) I remember one of the 700. They do not have orkkikset but Citikan balls with Toyo adapter. In fact, I put those couple of years ago and play it well.

Exchange of balls is quite easy, just tarvii big spanner that holds smirglata little thinner that can accommodate between. At the same time AHC fluids exchange (2x 2,5ltr nest box with Toyota, I think the 50e / pntö)

If you still want more after that, the load carrying capacity of such springs may be in the air to throw bags of “Air Lift 1000”. Satkun with a set price amount. I’ve got a little one would’ve used stock. I thought that thing would’ve tullu only condition but they did not come, so the springs and balls of the exchange, and then there was no longer an air cushion for tarvista so I took off. (My cart oo ku not less than 1.5t)

AHC in the life of the soul can be found in a very http://forum.ih8mud.com/threads/definit info … ms.604577 /

That is, in brief:

1.Cable + software that you get a pressure reading (20e)
2.The front springs tightening (0e)
3.Rear springs exchange (200-400e)
4.liquids and todnäk balloons exchange (800e-2500e)
5.Any addition to the air springs (100e)

The money returns to some extent, but everything is actually done, and after that is just like driving a different car.

Get you there to the top?

So yeah, it’s still that if those (iron) springs to save (ie, does not change or tighten) or job otherwise not postpone for too long, then the AHC’s components having so much hurt that then can’t survive any more balloons exchange but starts to go AHC pump etc. other stuff, and then tons of runs quite a few.

www.autodiagtool.de Some of VCM II Ford IDS update to V100

VCM II V100 Support VMM and CFR Diagnostic Scanner Deutsche Version for Ford

OEM VCM II IDS For Ford Multi-Language Diagnostic Tool V100 Support Key Programming:
1 Support Key Programming.It can do ford cars from 1996-2014.
2 Update by CD.
3 Can do Ecu program.

Now,www.carobd.de Some of VCM II Ford IDS update to V100

new-release-ford-vcm-ii-diagnostic-tool-sp177-c-blog

PCB Board

ford-vcm2-a-quality-pcb

Difference between All VCMII Series

Difference Among VCM II
 Item NO. Car Model Software Version Wireless Function Wireless Card Quality/Main Board
 SP177  Ford  IDS V100  NO  NO  Quality A
 SP177-C  Ford  IDS V100  Yes  NO  Quality A
 SP177-C1  Ford  IDS V97  Yes Yes  Quality A
 SP177-D  Mazda  IDS V96  NO  NO  Quality A
 SP177-E  Mazda        LandRover&Jaguar  IDS V97
JLR SDD V142
 NO  NO  Quality A
 SP177-F  LandRover&Jaguar  JLR SDD V142  NO  NO  Quality A
 SP177-G  Ford                          LandRover&Jaguar  IDS V100

JLR SDD V142

 Yes  NO  Quality A
 SP177-1  Ford  IDS V100  Yes  NO  Quality B
 SP177-C2  Ford  IDS V97  Yes  Yes  Quality B
 SP177-FB  LandRover&Jaguar  JLR SDD V139  NO  NO  Quality B
 SP177-DB  Mazda  IDS V96  Yes  NO  Quality B
 SP177-B   Ford VCM II Customer Flight Recoder(CFR) Cable (VP-2)

OEM Orange 5 V1.34 Professional Programming Device all inform here

OEM Orange 5 V1.34 Professional Programming Device is verified working fine and newly release at obdtool.co.uk. Following parts are about all details on OEM Orange 5 V1.34 in the following aspects including: function, package list, language, OS, supported software, software license, technical info and features.

Orange 5 Functions:

Orange 5 is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macro language for writing down protocols, which gives fast and easy capability to add new types of micro schemes, precisely meeting manufacturers’ requirements to read/write algorithms.

Orange 5 package list:

Orange-5 programmer 1

Power adapter 1

USBcable 1

Incircuit wire 10

SOIC8/DIP8 Expert adapter 1

SOIC8/DIP8 adapter 1

SOIC8_14_93Cxx adapter 1

SSOP8/DIP8 1

Lead with clips SOIC8 & DIP8 1

Adapter 05L28/05B 1

Adapter 908AS60/AZ60 QFP64 1

Adapter 68HC(7)05P3/E6 1

Adapter 05B/X_705B/X QFP64 V2 1

Adapter 11PA8/11E9 QFP64 1

Adapter 68HC05H12 1

Adapter 68HC11EA9 1

Adapter 908AS60 1

Adapter 9S12Dxx 1

Adapter 912Dxx 1

Adapter 9S12X 1

Adapter 912B32 QFP80 1

Adapter 68HC11F1 1

Adapter 68HC11L6 1

Adapter 68HC11KA4 1

Lead 11E9(20) with power 1

Lead for EWS3 mask 0D46J 1

Adapter TMS374C003A 1

Adapter MSP430F 1

Adapter 68HC11KA4 PLCC68 1

Adapter 908JL 1

Adapter PCF7941 1

Adapter 9S12XE 1

oem-orange5-programmer-blog-1
OEM Orange 5 language available:

Available with only English and Russian

orange5-programmer-blog-2

Orange 5 OS:

Windows XP, Win7 and Win8

Additional Supported Software:

Immo HPX 9V0

NEC V850ES/SJ3 V850ES/SG3 UART

NEC V850E2 NEW

Software Licenses:

MTRK (Included in Orange-5 base)

TMS (Included in Orange-5 base)

M08V NEW

Immo HPX 9V0

NEC V850ES/SJ3 V850ES/SG3 UART

NEC V850E2 NEW

OEM Orange 5 Technical Info:

* USB power supply (USB2.0/3.0)

* Universal easy to plug panel ZIF16 for EEPROM

* Control of contacts in the sockets

* Two expansions compatible with Orange4 and Omega MTRK

* Protection against overcurrent

* Overload voltage protection

* Two types of power supply: Standart (USB) and enhanced (USB + external power supply)

* Three 3 adjustable voltage and current control: Voltage of power supply ( 2.0…5.0V ), programming voltage (2.0…21.0V), additional static 10V for microcontrollers

* High-speed bidirectional pin drivers with adjustable voltage (2.0…5.0V)

* Wave cycle generator with frequency ( up to 24 Mhz) and out voltage(2.0…5.0V) adjustment

* Capability of functional emulation of class CDC USB devices

* Built-in 32-bit virtual machine

* Supported interface: I2C, SPI, MicroWire, JTAG, UART, BDM, ISO7816, K-LINE (via adapter), CAN (via adapter)

* Programmer is encolsed in a functional box. Supported working under Windows XP/7 32bit. [*Win8.1]

– Installation and Work with Orange-5 under Windwos 7 and Windows 8.1

CnCterm – Terminal program for work with COM ports.

Orange 5 Programmer Feature:

Supports any COM ports, incuding virtual ones from 1 to 20

Works with text (ASCII) and HEX mode

Creating a list of commands that allows editing and fast sending

Fine-tuning the exchange rate

Saving files including command and port settings.

Saving incoming data in binary files

File transfer via serial port.

Delay settings for bytes and blocks

“Echo” mode

Delay settings between incoming data

Managment of DTR, RTS chains, visualising DSR, CTS, CD, RI

Program doesn’t need to be installed

Support Orange5 programmer in emulation mode.

How to solve the BOSCH ESI 2014.1 ask activate?

Few days ago,one of my customer told me that his Bosch ESI 2014.1 asked the activate code,or can’t be used.

new-bosch-esi-tronic-blog-2

Look like this picture:

bosch-esi-blog-1

Solution way:

there has a crack(esi2.exe) on CD,you need replace the file which below installation directory,then use the activate code to activate it.(the activate code you can ask us to send to you.)

also,you can use this file to replace the esi2.exe,here is the download link for the replace file.

https://mega.nz/#!kI5j2DZB

And with this method,our customer said his problems is resolved.

Hope this article can help you solve your same problems.